IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 146

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Note:
11.3.1.6.2
11.3.1.7
Intel NetStructure
TPS
146
®
The procedures for upgrading the FRU information for other components is similar and
therefore not repeated here.
Upgrading Sensor Device Records (SDRs)
To determine which upgrade files to use for your hardware, see
to be upgraded for earlier generation boards1” on page
Note that when the old RedBoot starts on a board following FRU and SDR upgrade, but
before RedBoot itself is upgraded, the media tests will fail with the following
indications:
These failure indications are due to a lack of support for the current board hardware in
versions of the bootloaders prior to firmware version 1B1/1B1G. This is normal
behavior and these indications can be disregarded until the 1B1/1B1G or later version
of Redboot is loaded (see
Upgrading CPLDs
IXB2850 boards contains several in-system programmable Complex Programmable
Logic Devices (CPLDs):
1. Load the baseboard Sensor Device Records (SDR) file using a command such as
2. Upgrade the baseboard SDR using a command such as the following:
3. Repeat steps 1 and 2 above for the NP module, Gigabit Ethernet Mezzanine Card,
4. Reboot both the BMC and NPU as follows:
• Baseboard NPU CPLD
• Baseboard BMC CPLD
• Baseboard JTAG router CPLD
• NPU module CPLD
IXB2850 Packet Processing Boards
the following:
MIC, and FIC SDRs as necessary. See
earlier generation boards1” on page 138
for newer boards1” on page 139
RedBoot> load -r -v -m TFTP -h 172.28.57.135
<release_version>/ixmb2801_4_rohs5_sdr.bin
-
Raw file loaded 0x01000000-0x010005c4
RedBoot> update sdr -c bb -b 0x1000000 -l 0x5c4
Update Sensor Data Record (SDR) definitions - are you sure (y/n)? y
..........................................................................
......
SDR update ended.
TURN OFF AND ON POWER
RedBoot> reset bmc
BMC reset succeeded !
RedBoot> reset np
MB with GBE test .......... FAILED
DB with GBE test .......... FAILED
FIC_V2 test ............... FAILED
Section 11.3.1.1, “Upgrading RedBoot” on page
for the names of the relevant SDR files.
Table 58, “Components to be upgraded for
or
Table 59, “Components to be upgraded
-b 0x1000000 /tftpdir/
138.
Document Number: 05-2443-006
Table 58, “Components
IXB2850—Maintenance
140).
January 2007