IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 199

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Boot Monitor Console Commands—IXB2850
A.2.43
A.2.44
January 2007
Document Number: 05-2443-006
load
Download programs or data to the RedBoot platform.
Syntax
load [-v] [-d] [-r] [-m <protocol>] [-h <server_IP_address>] [-b <location>]
[file_name] [-s]
Parameters
Example
load -r -m xmodem -b 0x1000000
load -s ...
conditional go
net init
Reinitialize a debug slow port Ethernet controller after changes in the static IP address
or after changing BOOTP activity (enable/disable). After this command has been
issued, the debug Ethernet is ready to download code.
Syntax
net init
Example
net init
• -i <info> - Additional event data (data 3). See “data 3” in
• -v - Display a small spinner, while the download is in progress
• -d - Decompress the data stream
• -r - Specify raw (or binary) data
• -m - Specify the protocol to be used for transfer:
• -h <server_IP_address> - The IP address of TFTP server
• -b <location> - The address in memory to load data to
•
• -s - Verify SSU header and image integrity. If the -s option is specified and the
Table 54
loaded image is not a valid SSU image (that is, it has an incorrect checksum, an
incorrect SSU header or no SSU header), the load command fails. The intention is
to prevent the execution of a damaged diagnostics image.
<file_name> - The name of the file to be transferred
— <post_type>. See “data 2” in
— <diag_type>. See “data 2” in
— tftp
— xmodem
page
class” on page
depending on the event class.
116.
117.
Table 53, “IPMI event data for the POST class” on
Table 54, “IPMI event data for the diagnostics
Intel NetStructure
®
IXB2850 Packet Processing Boards
Table
52,
Table 53
and
TPS
199