EP1AGX20CF484C6N Altera, EP1AGX20CF484C6N Datasheet - Page 77

• Manufacturer Part Number: EP1AGX20CF484C6N
• Description: IC ARRIA GX FPGA 20K 484FBGA
• Manufacturer: Altera
• Series: Arria GXr

Specifications of EP1AGX20CF484C6N

• Number Of Logic Elements/cells: 21580
• Number Of Labs/clbs: 1079
• Total Ram Bits: 1229184
• Number Of I /o: 230
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Arria™ GX
• Number Of Logic Blocks/elements: 21580
• # I/os (max): 230
• Process Technology: CMOS
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 21580
• Ram Bits: 1229184
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• No. Of Macrocells: 21580
• Family Type: Arria GX
• No. Of I/o's: 230
• Operating Frequency Max: 622.08MHz
• Operating Temperature Range: 0°C To +85°C
• Logic Case Style: BGA
• No. Of Pins: 484
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-2395

Chapter 2: Arria GX Architecture
PLLs and Clock Networks
Figure 2–60. External PLL Output Clock Control Blocks
Notes to
(1) These clock select signals can only be set through a configuration file (.sof or .pof) and cannot be dynamically controlled during user mode
(2) The clock control block feeds to a multiplexer within the PLL_OUT pin’s IOE. The PLL_OUT pin is a dual-purpose pin. Therefore, this multiplexer
© December 2009 Altera Corporation
operation.
selects either an internal signal or the output of the clock control block.
Figure
2–60:
For the global clock control block, clock source selection can be controlled either
statically or dynamically. You have the option of statically selecting the clock source
by using the Quartus II software to set specific configuration bits in the configuration
file (.sof or .pof) or controlling the selection dynamically by using internal logic to
drive the multiplexer select inputs. When selecting statically, the clock source can be
set to any of the inputs to the select multiplexer. When selecting the clock source
dynamically, you can either select between two PLL outputs (such as the C0 or C1
outputs from one PLL), between two PLLs (such as the C0/C1 clock output of one
PLL or the C0/C1 c1ock output of the other PLL), between two clock pins (such as
CLK0 or CLK1), or between a combination of clock pins or PLL outputs.
For the regional and PLL_OUT clock control block, clock source selection can only be
controlled statically using configuration bits. Any of the inputs to the clock select
multiplexer can be set as the clock source.
Arria GX clock networks can be disabled (powered down) by both static and dynamic
approaches. When a clock net is powered down, all logic fed by the clock net is in an
off-state thereby reducing the overall power consumption of the device. GCLK and
RCLK networks can be powered down statically through a setting in the
configuration file (.sof or .pof). Clock networks that are not used are automatically
powered down through configuration bit settings in the configuration file generated
by the Quartus II software. The dynamic clock enable or disable feature allows the
internal logic to control power up/down synchronously on GCLK and RCLK nets and
PLL_OUT pins. This function is independent of the PLL and is applied directly on the
clock network or PLL_OUT pin, as shown in
IOE
Internal
Logic
(2)
Outputs (c[5..0])
PLL Counter
PLL_OUT
Enable/
Disable
Pin
6
Internal
Static Clock
Select (1)
Logic
Static Clock Select
Figure 2–58
(1)
through
Arria GX Device Handbook, Volume 1
Figure
2–60.
2–71