XW2Z-100J-B9 Omron, XW2Z-100J-B9 Datasheet - Page 41

• Manufacturer Part Number: XW2Z-100J-B9
• Description: SERVO DRV+G8R CONNECTING CABLES
• Manufacturer: Omron

Specifications of XW2Z-100J-B9

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: XW2Z100JB9

Basic Operating Procedure
9. Save and Print the
Programs
10. Run the Programs
18
1,2,3...
1. Select the bit for differential monitoring.
2. Select Differential Monitor from the PLC Menu. The Differential Monitor
3. Select Rising or Falling.
4. Click the Start Button. The buzzer will sound when the specified change is
5. Click the Stop Button. Differential monitoring will stop.
Time Chart Monitoring
The CX-Programmer’s time chart monitor operation can be used to check and
debug program execution.
Data Tracing
The CX-Programmer’s data trace operation can be used to check and debug
program execution.
Online Editing
When a few lines of the program in a Module have to be modified, they can be
edited online with the FQM1 in MONITOR mode or PROGRAM mode from
the CX-Programmer. When more extensive modifications are needed, upload
the program from the Module to the CX-Programmer, make the necessary
changes, and transfer the edited program back to the Module.
To save a program, select File and then Save (or Save As) from the CX-Pro-
grammer menus.
To print a program, select File and then Print from the CX-Programmer
menus.
Switch the FQM1 to RUN mode to run the programs.
Dialog Box will be displayed.
detected and the count will be incremented.
Section 1-6