upd78f0114hgb-8es-a Renesas Electronics Corporation., upd78f0114hgb-8es-a Datasheet - Page 458

• Manufacturer Part Number: upd78f0114hgb-8es-a
• Description: 8-bit Single-chip Microcontrollers
• Manufacturer: Renesas Electronics Corporation.

<R>
(1)
Note After opening the dry pack, store it at 25 C or less and 65% RH or less for the allowable storage period.
(2)
Note After opening the dry pack, store it at 25 C or less and 65% RH or less for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
Remarks
458
Infrared reflow
VPS
Wave soldering
Partial heating
Infrared reflow
Partial heating
Soldering Method
Soldering Method
These products should be soldered and mounted under the following recommended conditions.
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
PD78F0112HGB-8ES, 78F0113HGB-8ES, 78F0114HGB-8ES
PD78F0112HGB(A)-8ES, 78F0113HGB(A)-8ES, 78F0114HGB(A)-8ES
PD78F0112HGB(A1)-8ES, 78F0113HGB(A1)-8ES, 78F0114HGB(A1)-8ES
PD78F0112HGB-8ES-A, 78F0113HGB-8ES-A, 78F0114HGB-8ES-A
PD78F0112HGB(A)-8ES-A, 78F0113HGB(A)-8ES-A, 78F0114HGB(A)-8ES-A
PD78F0112HGB(A1)-8ES-A, 78F0113HGB(A1)-8ES-A, 78F0114HGB(A1)-8ES-A
Products that have the part numbers suffixed by "-A" are lead-free products.
Package peak temperature: 235 C, Time: 30 seconds max. (at 210 C or higher),
Count: 3 times or less, Exposure limit: 7 days
20 to 72 hours)
Solder bath temperature: 260 C max., Time: 10 seconds max., Count: Once,
Preheating temperature: 120 C max. (package surface temperature), Exposure
limit: 7 days
Pin temperature: 350 C max., Time: 3 seconds max. (per pin row)
Package peak temperature: 260 C, Time: 60 seconds max. (at 220 C or higher),
Count: Three times or less, Exposure limit: 7 days
for 20 to 72 hours)
Pin temperature: 350 C max., Time: 3 seconds max. (per pin row)
Package peak temperature: 215 C, Time: 40 seconds max. (at 200 C or higher),
Count: 3 times or less, Exposure limit: 7 days
20 to 72 hours)
CHAPTER 29 RECOMMENDED SOLDERING CONDITIONS
Table 29-1. Surface Mounting Type Soldering Conditions
Note
(after that, prebake at 125 C for 20 to 72 hours)
User’s Manual U16961EJ4V0UD
Soldering Conditions
Soldering Conditions
Note
Note
(after that, prebake at 125 C for
(after that, prebake at 125 C for
Note
(after that, prebake at 125 C
IR35-207-3
VP15-207-3
WS60-207-1
IR60-207-3
Condition Symbol
Condition Symbol
Recommended
Recommended