mc68hc908ld64 Freescale Semiconductor, Inc, mc68hc908ld64 Datasheet - Page 222

• Manufacturer Part Number: mc68hc908ld64
• Description: M68hc08 Microcontrollers Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Multi-Master IIC Interface (MMIIC)
15.3 Features
15.4 I/O Pins
Data Sheet
222
Generic Pin Names:
MMIIC
SDA
SCL
This Multi-master IIC module uses the IICSCL clock line and the IICSDA
data line to communicate with external DDC host or IIC interface. These
two pins are shared with port pins PTD6 and PTD7 respectively. The
outputs of IICSDA and IICSCL pins are open-drain type — no clamping
diode is connected between the pin and internal V
data rate typically is 750k-bps. The maximum communication length and
the number of devices that can be connected are limited by a maximum
bus capacitance of 400pF.
The MMIIC module uses two I/O pins, shared with standard port I/O pins.
The full name of the MMIIC I/O pins are listed in
pin name appear in the text that follows.
•
•
•
•
•
•
•
•
•
•
Table 15-1. Pin Name Conventions
Compatibility with multi-master IIC bus standard
Software controllable acknowledge bit generation
Interrupt driven byte by byte data transfer
Calling address identification interrupt
Auto detection of R/W bit and switching of transmit or receive
mode
Detection of START, repeated START, and STOP signals
Auto generation of START and STOP condition in master mode
Arbitration loss detection and No-ACK awareness in master mode
8 selectable baud rate master clocks
Automatic recognition of the received acknowledge bit
Multi-Master IIC Interface (MMIIC)
Full MCU Pin Names:
PTD7/IICSDA
PTD6/IICSCL
IICSCLE bit in PDCR ($0069)
IICDATE bit in PDCR ($0069)
Pin Selected for
IIC Function By:
MC68HC908LD64
Table
Freescale Semiconductor
DD
. The maximum
15-1. The generic
—
Rev. 3.0