at91sam9g20-cu ATMEL Corporation, at91sam9g20-cu Datasheet - Page 373

• Manufacturer Part Number: at91sam9g20-cu
• Description: At91 Arm Thumb Microcontrollers
• Manufacturer: ATMEL Corporation

Table 29-2.
Notes:
6384B–ATARM–15-Dec-08
Offset
0x0070
0x0074
0x0078
0x007C
to
0x009C
0x00A0
0x00A4
0x00A8
0x00AC
1. Reset value of PIO_PSR depends on the product implementation.
2. PIO_ODSR is Read-only or Read/Write depending on PIO_OWSR I/O lines.
3. Reset value of PIO_PDSR depends on the level of the I/O lines. Reading the I/O line levels requires the clock of the PIO
4. PIO_ISR is reset at 0x0. However, the first read of the register may read a different value as input changes may have
5. Only this set of registers clears the status by writing 1 in the first register and sets the status by writing 1 in the second
Controller to be enabled, otherwise PIO_PDSR reads the levels present on the I/O line at the time the clock was disabled.
occurred.
register.
Register Mapping (Continued)
Register
Peripheral A Select Register
Peripheral B Select Register
AB Status Register
Reserved
Output Write Enable
Output Write Disable
Output Write Status Register
Reserved
(5)
(5)
(5)
Name
PIO_ASR
PIO_BSR
PIO_ABSR
PIO_OWER
PIO_OWDR
PIO_OWSR
AT91SAM9G20 Preliminary
Write-only
Write-only
Read-only
Write-only
Write-only
Read-only
Access
0x00000000
0x00000000
Reset
–
–
–
–
373