tmxf28155 ETC-unknow, tmxf28155 Datasheet - Page 284

• Manufacturer Part Number: tmxf28155
• Description: Tmxf28155 Super Mapper 155/51 Mbits/s Sonet/sdh X28/x21 Ds1/e1
• Manufacturer: ETC-unknow

155/51 Mbits/s SONET/SDH x28/x21 DS1/E1
12 28-Channel Framer Registers
Table 387. FRM_PMLR6, Performance Monitor Link Register 6 (COR)
* See
Table 388. FRM_PMLR7, Performance Monitor Link Register 7 (COR)
* See
284
Address*
Address*
0x8LP85
0x8LP86
Table 381
Table 381
15:5
15:0
for values of L and P.
for values of L and P .
Bit
Bit
4
3
2
1
0
FRM_FDL_PLBOFF ESF_FDL Payload Loopback Disable. A 1 indicates the
FRM_FDL_LLBOFF ESF_FDL Line Loopback Disable. A 1 indicates the receive
FRM_FDL_PLBON ESF_FDL Payload Loopback Enable. A 1 indicates the
FRM_FDL_LLBON
FRM_BPV[15:0]
FRM_FDL_RAI
Name
Name
—
Reserved.
ESF_FDL_RAI/Yellow Alarm. A 1 indicates the receive
framer detected the ESF_FDL_RAI/yellow alarm code in the
payload. This code is defined in ANSI T1.403-1995 as a
00000000 11111111 pattern in the facility data link (received
right-to-left). This signal is set when the pattern is detected
(10 consecutive times) and is cleared when it is read if the pat-
tern is no longer being detected.
receive framer detected the ESF_FDL payload loopback
enable code in the payload. This code is defined in
ANSI T1.403-1995 as a 00010100 11111111 pattern in the
facility data link (received right-to-left). This signal is set when
the pattern is detected (10 consecutive times) and is cleared
when it is read if the pattern is no longer being detected. This
could also be set by FF_PLB (manual PLB indication) input.
receive framer detected the ESF_FDL payload loopback dis-
able code in the payload. This code is defined in
ANSI T1.403-1995 as a 00110010 11111111 pattern in the
facility data link (received right-to-left). This signal is set when
the pattern is detected (10 consecutive times) and is cleared
when it is read if the pattern is no longer being detected.
ESF_FDL Line Loopback Enable. A 1 indicates the receive
framer detected the ESF_FDL line loopback enable code in
the payload. This code is defined in ANSI T1.403-1995 as a
00001110 11111111 pattern in the facility data link (received
right-to-left). This signal is set when the pattern is detected
(10 consecutive times) and is cleared when it is read if the pat-
tern is no longer being detected.
framer detected the ESF_FDL line loopback disable code in
the payload. This code is defined in ANSI T1.403-1995 as a
00111000 11111111 pattern in the facility data link (received
right-to-left). This signal is set when the pattern is detected
(10 consecutive times) and is cleared when it is read if the pat-
tern is no longer being detected.
Bipolar Violation Counter. This register contains the 16-bit
count of received bipolar violations, line code violations, and
excessive zeros.
(continued)
Function
Function
Agere Systems Inc.
May 2001
Default
Default
Reset
Reset
0x0
0
0
0
0
0
0