APMOTOR56F8000E Freescale Semiconductor, APMOTOR56F8000E Datasheet - Page 91

• Manufacturer Part Number: APMOTOR56F8000E
• Description: KIT DEMO MOTOR CTRL SYSTEM
• Manufacturer: Freescale Semiconductor
• Type: Motor / Motion Controllers & Driversr

Specifications of APMOTOR56F8000E

• Accessory Type: Motor Controller
• Input Voltage: 9 V
• Interface Type: RS-232
• Product: Power Management Modules
• For Use With/related Products: DEMO56F8013, DEMO56F8013-E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

56F8014 Information
RS
Reset
Figure 8-4 GPIOD Register Map Summary
Part 9 Joint Test Action Group (JTAG)
9.1 56F8014 Information
Please contact your Freescale sales representative or authorized distributor for device/package-specific
BSDL information.
The TRST pin is not available in this package. The pin is tied to V
in the package.
DD
The JTAG state machine is reset during POR and can also be reset via a soft reset by holding TMS high
for five rising edges of TCK, as described in the 56F8000 Peripheral User Manual.
Part 10 Specifications
10.1 General Characteristics
The 56F8014 is fabricated in high-density CMOS with 5V-tolerant TTL-compatible digital inputs. The
term “5V-tolerant” refers to the capability of an I/O pin, built on a 3.3V-compatible process technology,
to withstand a voltage up to 5.5V without damaging the device. Many systems have a mixture of devices
designed for 3.3V and 5V power supplies. In such systems, a bus may carry both 3.3V- and 5V-compatible
I/O voltage levels (a standard 3.3V I/O is designed to receive a maximum voltage of 3.3V ± 10% during
normal operation without causing damage). This 5V-tolerant capability therefore offers the power savings
of 3.3V I/O levels, combined with the ability to receive 5V levels without damage.
Absolute maximum ratings in
Table 10-1
are stress ratings only, and functional operation at the maximum
is not guaranteed. Stress beyond these ratings may affect device reliability or cause permanent damage to
the device.
Unless otherwise stated, all specifications within this chapter apply over the temperature range of -40ºC to
125ºC ambient temperature over the following supply ranges:
V
= V
A = 0V, V
= V
= 3.0–3.6V, CL < 50pF, f
= 32MHz
SS
SS
DD
DDA
OP
56F8014 Technical Data, Rev. 11
Freescale Semiconductor
91