AT91SAM9G10-EK Atmel, AT91SAM9G10-EK Datasheet - Page 75

KIT DEV FOR SAM9G10 ARM

AT91SAM9G10-EK

Manufacturer Part Number
AT91SAM9G10-EK
Description
KIT DEV FOR SAM9G10 ARM
Manufacturer
Atmel
Type
MCUr
Datasheets

Specifications of AT91SAM9G10-EK

Contents
Board, Cables, Power Supply
Silicon Manufacturer
Atmel
Core Architecture
AVR
Kit Contents
Board
Svhc
No SVHC (15-Dec-2010)
Mcu Supported Families
AT91SAM9G10, ARM926EJ-S
Tool / Board Applications
Microcontroller
Rohs Compliant
Yes
For Use With/related Products
*
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
13.3
6462A–ATARM–03-Jun-09
Device Initialization
Initialization follows the steps described below:
Table 13-1
Table 13-1.
3.0
4.433619
6.0
1. Stack setup for ARM supervisor mode
2. Main Oscillator Frequency Detection
3. C variable initialization
4. PLL setup: PLLB is initialized to generate a 48 MHz clock necessary to use the USB
5. Initialization of the DBGU serial port (115200 bauds, 8, N, 1)
6. Enable the user reset
7. Jump to SerialFlash Boot sequence through NPCS0. If SerialFlash Boot succeeds, per-
8. Jump to DataFlash Boot sequence through NPCS0. If DataFlash Boot succeeds, per-
9. Jump to NAND Flash Boot sequence. If NAND Flash Boot succeeds, perform a remap
10. Jump to SD Card Boot sequence. If SD Card Boot succeeds, perform a remap and
11. Jump to EEPROM Boot sequence. If EEPROM Boot succeeds, perform a remap and
12. Activation of the Instruction Cache
13. Jump to SAM-BA Boot sequence
14. Disable the WatchDog
15. Initialization of the USB Device Port
7.3728
11.05920
14.7456
Device. A register located in the Power Management Controller (PMC) determines the
frequency of the main oscillator and thus the correct factor for the PLLB.
form a remap and jump to 0x0.
form a remap and jump to 0x0.
and jump to 0x0.
jump to 0x0.
jump to 0x0.
defines the crystals supported by the Boot Program.
Crystals Supported by Software Auto-Detection (MHz)
3.2768
6.144
7.864320
12.0
16.0
4.608
3.6864
4.9152
6.4
8.0
12.288
17.734470
3.84
5.0
6.5536
9.8304
13.56
18.432
AT91SAM9G10
4.0
5.24288
7.159090
10.0
14.31818
20.0
75

Related parts for AT91SAM9G10-EK