PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 85

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.1.3
the displayed values were set during the last programming session.
The [Option Setting] menu is used to check the command option and security flag currently set for the PG-FP4. All
The setting cannot be changed on this menu.
[Option Setting >]
• Pressing the Next button displays the [Voltage Setting] menu.
• Pressing the Enter button displays the following commands that can be executed on the [Option Setting] menu.
• Pressing the Cancel button displays the [Commands] menu again.
[BLN before ERS] Displays the set status of the command option Blank check before Erase as either of the
[VRF after PRG]
[SCF after PRG]
[SUM after PRG]
(continued on next page)
Note This menu is displayed only when a single-power-supply flash memory microcontroller is used.
↓ Next button
↓ Next button
↓ Next button
↓ Next button
[Option Setting] menu
following.
Displays the set status of the command option Verify after Program as either of the following.
Displays the set status of the command option Security flag after Program as either of the
following
Displays the set status of the command option Checksum after Program as either of the
following
on: Blank check is executed before execution of the Erase and EPV commands.
off: Blank check is not executed before execution of the Erase and EPV commands.
on: After execution of the Program and EPV commands, the write data is transmitted
off: After execution of the Program and EPV commands, the data transmitted from the
on: After execution of the Program and EPV commands, the security flag selected by
off: After execution of the Program and EPV commands, the security flag is not
on: After execution of the Program and EPV commands, the flash memory checksum
off: After execution of the Program and EPV command, the flash memory checksum
CHAPTER 6 PG-FP4 OPERATION IN STANDALONE MODE
If the result of the blank check is OK, erasure processing is not executed.
from the programmer and verified against the data written to the flash memory.
programmer is not verified against the data written to the flash memory.
Security flag settings is automatically set.
automatically set.
value of the target device is read from the target device and displayed on the
programmer.
value of the target device is neither read nor displayed.
Note
Note
.
.
User’s Manual U15260EJ4V0UM
83