MC9S12NE64VTU Freescale Semiconductor, MC9S12NE64VTU Datasheet - Page 246

• Manufacturer Part Number: MC9S12NE64VTU
• Description: IC MCU 25MHZ ETHERNET/PHY 80TQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12NE64VTU

• Mfg Application Notes: MC9S12NE64 Integrated Ethernet Controller Implementing an Ethernet Interface with the MC9S12NE64 Web Server Development with MC9S12NE64 and Open TCP
• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 38
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 3.465 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 80-TQFP Exposed Pad, 80-eTQFP, 80-HTQFP, 80-VQFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 16 bit
• Operating Supply Voltage: - 0.3 V to + 3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• On-chip Adc: 10 bit
• For Use With: EVB9S12NE64E - BOARD EVAL FOR 9S12NE64DEMO9S12NE64E - DEMO BOARD FOR 9S12NE64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Chapter 8 Serial Communication Interface (SCIV3)
8.4.4
8.4.4.1
The SCI transmitter can accommodate either 8-bit or 9-bit data characters. The state of the M bit in SCI
control register 1 (SCICR1) determines the length of data characters. When transmitting 9-bit data, bit T8
in SCI data register high (SCIDRH) is the ninth bit (bit 8).
8.4.4.2
To transmit data, the MCU writes the data bits to the SCI data registers (SCIDRH/SCIDRL), which in turn
are transferred to the transmitter shift register. The transmit shift register then shifts a frame out through
the TXD pin, after it has prefaced them with a start bit and appended them with a stop bit. The SCI data
registers (SCIDRH and SCIDRL) are the write-only buffers between the internal data bus and the transmit
shift register.
The SCI also sets a flag, the transmit data register empty flag (TDRE), every time it transfers data from
the buffer (SCIDRH/L) to the transmitter shift register. The transmit driver routine may respond to this
246
TDRE INTERRUPT REQUEST
CLOCK
BUS
TC INTERRUPT REQUEST
SBR12–SBR0
Transmitter
Transmitter Character Length
Character Transmission
BAUD DIVIDER
PE
PT
M
GENERATION
PARITY
÷
T8
16
Figure 8-13. Transmitter Block Diagram
MC9S12NE64 Data Sheet, Rev. 1.1
H
11-BIT TRANSMIT SHIFT REGISTER
8
TDRE
TCIE
TIE
TC
7
6
SCI DATA REGISTERS
5
TRANSMITTER CONTROL
INTERNAL BUS
4
3
2
TE
1
0
SBK
L
CONTROL
LOOP
Freescale Semiconductor
LOOPS
RSRC
TO RECEIVER
SCTXD