D13003TF16V Renesas Electronics America, D13003TF16V Datasheet - Page 181

• Manufacturer Part Number: D13003TF16V
• Description: IC H8/3003 ROMLESS 112QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13003TF16V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 50
• Program Memory Type: ROMless
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Refresh Cycle Priority Order: When there are simultaneous bus requests, the priority order is:
For details see section 6.3.7, Bus Arbiter Operation.
Wait State Insertion: When bit AST3 is set to 1 in ASTCR, the wait state controller (WSC) can
insert wait states into bus cycles and refresh cycles. For details see section 6.3.5, Wait Modes.
Self-Refresh Mode: Some pseudo-static RAM devices have a self-refresh function. After the
SRFMD bit is set to 1 in RFSHCR, when a transition to software standby mode occurs, the
H8/3003’s CS
self-refresh function can be used. On exit from software standby mode, the RFSH output goes
high.
Table 7-8 shows the pin states in software standby mode. Figure 7-16 shows the signal output
timing.
Table 7-8 Pin States in Software Standby Mode (2) (PSRAME = 1, DRAME = 0)
Signal
CS
RD
HWR
LWR
RFSF
3
(High)
3
External bus master > refresh controller > DMA controller > CPU
output goes high and its RFSH output goes low so that the pseudo-static RAM
SRFMD = 0
High
High-impedance
High-impedance
High-impedance
High
Software Standby Mode
161
SRFMD = 1 (self-refresh mode)
High
High-impedance
High-impedance
High-impedance
Low
(Low)