DSPIC33FJ12GP202-I/SS Microchip Technology, DSPIC33FJ12GP202-I/SS Datasheet - Page 107

• Manufacturer Part Number: DSPIC33FJ12GP202-I/SS
• Description: IC DSPIC MCU/DSP 12K 28SSOP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ12GP202-I/SS

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Core Frequency: 40MHz
• Core Supply Voltage: 2.75V
• Embedded Interface Type: I2C, JTAG, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 12KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28SSOP
• Device Core: dsPIC
• Family Name: dsPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 10-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 9-1:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-14
bit 13
bit 12
bit 11
bit 10-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-1
bit 0
Note 1:
I2C1MD
R/W-0
U-0
—
PCFGx bits have no effect if the ADC module is disabled by setting this bit. When the bit is set, all port
pins that have been multiplexed with ANx will be in Digital mode.
Unimplemented: Read as ‘0’
T3MD: Timer3 Module Disable bit
1 = Timer3 module is disabled
0 = Timer3 module is enabled
T2MD: Timer2 Module Disable bit
1 = Timer2 module is disabled
0 = Timer2 module is enabled
T1MD: Timer1 Module Disable bit
1 = Timer1 module is disabled
0 = Timer1 module is enabled
Unimplemented: Read as ‘0’
I2C1MD: I2C1 Module Disable bit
1 = I2C1 module is disabled
0 = I2C1 module is enabled
Unimplemented: Read as ‘0’
U1MD: UART1 Module Disable bit
1 = UART1 module is disabled
0 = UART1 module is enabled
Unimplemented: Read as ‘0’
SPI1MD: SPI1 Module Disable bit
1 = SPI1 module is disabled
0 = SPI1 module is enabled
Unimplemented: Read as ‘0’
AD1MD: ADC1 Module Disable bit
1 = ADC1 module is disabled
0 = ADC1 module is enabled
U-0
U-0
—
—
PMD1: PERIPHERAL MODULE DISABLE CONTROL REGISTER 1
W = Writable bit
‘1’ = Bit is set
R/W-0
R/W-0
U1MD
T3MD
R/W-0
T2MD
U-0
(1)
—
Preliminary
dsPIC33FJ12GP201/202
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
SPI1MD
R/W-0
R/W-0
T1MD
U-0
U-0
—
—
x = Bit is unknown
U-0
U-0
—
—
DS70264D-page 105
AD1MD
R/W-0
U-0
—
bit 8
bit 0