PIC24FJ256DA206-I/PT Microchip Technology, PIC24FJ256DA206-I/PT Datasheet - Page 139

• Manufacturer Part Number: PIC24FJ256DA206-I/PT
• Description: MCU PIC 16BIT FLASH 256K 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256DA206-I/PT

• Core Size: 16-Bit
• Program Memory Size: 256KB (85.5K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 52
• Ram Memory Size: 96KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, SPI, UART, USB
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 7-42:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11-8
bit 7
bit 6-0
R-0, HSC
CPUIRQ
U-0
—
CPUIRQ: Interrupt Request from Interrupt Controller CPU bit
1 = An interrupt request has occurred but has not yet been Acknowledged by the CPU; this happens
0 = No interrupt request is unacknowledged
Unimplemented: Read as ‘0’
VHOLD: Vector Number Capture Configuration bit
1 = The VECNUM bits contain the value of the highest priority pending interrupt
0 = The VECNUM bits contain the value of the last Acknowledged interrupt (i.e., the last interrupt that
Unimplemented: Read as ‘0’
ILR<3:0>: New CPU Interrupt Priority Level bits
1111 = CPU Interrupt Priority Level is 15
•
•
•
0001 = CPU Interrupt Priority Level is 1
0000 = CPU Interrupt Priority Level is 0
Unimplemented: Read as ‘0’
VECNUM<5:0>: Vector Number of Pending Interrupt or Last Acknowledged Interrupt bits
VHOLD = 1: The VECNUM bits indicate the vector number (from 0 to 118) of the last interrupt to occur
VHOLD = 0: The VECNUM bits indicate the vector number (from 0 to 118) of the interrupt request
VECNUM6
R-0, HSC
when the CPU priority is higher than the interrupt priority
has occurred with higher priority than the CPU, even if other interrupts are pending)
U-0
—
INTTREG: INTERRUPT CONTROLLER TEST REGISTER
currently being handled
HSC = Hardware Settable/Clearable bit
W = Writable bit
‘1’ = Bit is set
VECNUM5
R-0, HSC
VHOLD
R/W-0
VECNUM4
R-0, HSC
PIC24FJ256DA210 FAMILY
U-0
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
VECNUM3
R-0, HSC
R-0, HSC
ILR3
VECNUM2
R-0, HSC
R-0, HSC
ILR2
x = Bit is unknown
VECNUM1
R-0, HSC
R-0, HSC
ILR1
DS39969B-page 139
VECNUM0
R-0, HSC
R-0, HSC
ILR0
bit 8
bit 0