PIC24FJ256DA206-I/PT Microchip Technology, PIC24FJ256DA206-I/PT Datasheet - Page 255

• Manufacturer Part Number: PIC24FJ256DA206-I/PT
• Description: MCU PIC 16BIT FLASH 256K 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256DA206-I/PT

• Core Size: 16-Bit
• Program Memory Size: 256KB (85.5K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 52
• Ram Memory Size: 96KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, SPI, UART, USB
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

18.7.1
REGISTER 18-3:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R-0, HSC
U-0
—
ID
USB OTG MODULE CONTROL REGISTERS
Unimplemented: Read as ‘0’
ID: ID Pin State Indicator bit
1 = No plug is attached, or a type B cable has been plugged into the USB receptacle
0 = A type A plug has been plugged into the USB receptacle
Unimplemented: Read as ‘0’
LSTATE: Line State Stable Indicator bit
1 = The USB line state (as defined by SE0 and JSTATE) has been stable for the previous 1 ms
0 = The USB line state has not been stable for the previous 1 ms
Unimplemented: Read as ‘0’
SESVD: Session Valid Indicator bit
1 = The V
0 = The V
SESEND: B Session End Indicator bit
1 = The V
0 = The V
Unimplemented: Read as ‘0’
VBUSVD: A V
1 = The V
0 = The V
B-device
B-device
A-device
U-0
U-0
—
—
U1OTGSTAT: USB OTG STATUS REGISTER (HOST MODE ONLY)
BUS
BUS
BUS
BUS
BUS
BUS
BUS
U = Unimplemented bit, read as ‘0’
W = Writable bit
‘1’ = Bit is set
voltage is above VA_SESS_VLD (as defined in the USB OTG Specification) on the A or
voltage is below VA_SESS_VLD on the A or B-device
voltage is above VB_SESS_END on the B-device
voltage is below VA_VBUS_VLD on the A-device
voltage is below VB_SESS_END (as defined in the USB OTG Specification) on the
voltage is above VA_VBUS_VLD (as defined in the USB OTG Specification) on the
R-0, HSC
LSTATE
Valid Indicator bit
U-0
—
PIC24FJ256DA210 FAMILY
U-0
U-0
—
—
HSC = Hardware Settable/Clearable bit
‘0’ = Bit is cleared
R-0, HSC
SESVD
U-0
—
R-0, HSC
SESEND
U-0
—
x = Bit is unknown
U-0
U-0
—
—
DS39969B-page 255
R-0, HSC
VBUSVD
U-0
—
bit 8
bit 0