PIC24FJ256DA206-I/PT Microchip Technology, PIC24FJ256DA206-I/PT Datasheet - Page 143

• Manufacturer Part Number: PIC24FJ256DA206-I/PT
• Description: MCU PIC 16BIT FLASH 256K 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256DA206-I/PT

• Core Size: 16-Bit
• Program Memory Size: 256KB (85.5K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 52
• Ram Memory Size: 96KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, SPI, UART, USB
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.3
The following five Special Function Registers control
the operation of the oscillator:
• OSCCON
• CLKDIV
• OSCTUN
• CLKDIV2
• REFOCON
REGISTER 8-1:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
HS = Hardware Settable bit
bit 15
bit 14-12
bit 11
Note 1:
CLKLOCK
R/S-0
U-0
—
2:
3:
Control Registers
Reset values for these bits are determined by the FNOSC Configuration bits.
The state of the IOLOCK bit can only be changed once an unlocking sequence has been executed. In
addition, if the IOL1WAY Configuration bit is ‘1’, once the IOLOCK bit is set, it cannot be cleared.
Also resets to ‘0’ during any valid clock switch or whenever a non PLL Clock mode is selected.
R-x, HSC
Unimplemented: Read as ‘0’
COSC<2:0>: Current Oscillator Selection bits
111 = Fast RC Oscillator with Postscaler (FRCDIV)
110 = Fast RC/16 Oscillator
101 = Low-Power RC Oscillator (LPRC)
100 = Secondary Oscillator (SOSC)
011 = Primary Oscillator with PLL module (XTPLL, HSPLL, ECPLL)
010 = Primary Oscillator (XT, HS, EC)
001 = Fast RC Oscillator with Postscaler and PLL module (FRCPLL)
000 = Fast RC Oscillator (FRC)
Unimplemented: Read as ‘0’
IOLOCK
COSC2
R/W-0
OSCCON: OSCILLATOR CONTROL REGISTER
(2)
(1)
C = Clearable bit
W = Writable bit
‘1’ = Bit is set
R-x, HSC
R-0, HSC
COSC1
LOCK
(1)
(3)
R-x, HSC
COSC0
U-0
—
PIC24FJ256DA210 FAMILY
(1)
S = Settable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/C-0, HS
U-0
CF
—
(1)
The OSCCON register (Register 8-1) is the main con-
trol register for the oscillator. It controls clock source
switching and allows the monitoring of clock sources.
The CLKDIV register (Register 8-2) controls the
features associated with Doze mode, as well as the
postscaler for the FRC oscillator.
The OSCTUN register (Register 8-3) allows the user to
fine tune the FRC oscillator over a range of
approximately ±1.5%.
The CLKDIV2 register (Register 8-4) controls the clock
to the display glass, with the frequency ranging from
750 kHz to 96 MHz.
The REFOCON register (Register 8-5) controls the
frequency of the reference clock out.
POSCEN
R/W-x
NOSC2
R/W-0
(1)
x = Bit is unknown
HSC = Hardware Settable/Clearable bit
SOSCEN
R/W-x
NOSC1
R/W-0
(1)
DS39969B-page 143
R/W-x
OSWEN
NOSC0
R/W-0
(1)
bit 8
bit 0