HD64F3048F16 Renesas Electronics America, HD64F3048F16 Datasheet - Page 225

• Manufacturer Part Number: HD64F3048F16
• Description: IC H8 MCU FLASH 128K 100QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3048F16

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Package: 100PQFP
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 70
• Interface Type: SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

If a bus cycle is prolonged by insertion of wait states, the first refresh request is held, as in the
bus-released state.
If there is contention with a bus request from an external bus master when making a transition
to software standby mode, a one-state bus-released state may occur immediately before the
transition to software standby mode (see figure 7.25).
When using software standby mode, clear the BRLE bit to 0 in BRCR before executing the
SLEEP instruction.
When making a transition to self-refresh mode, the strobe waveform output may not be
guaranteed due to the same kind of contention. This, too, can be prevented by clearing the
BRLE bit to 0 in BRCR.
BREQ
BACK
Address bus
Strobe
Figure 7.25 Contention between Bus-Released State and Software Standby Mode
RFSH
Refresh
request
BACK
Bus-released state
Figure 7.24 Refresh Cycles when Bus Is Released
External bus
released state
Refresh cycle
Software standby mode
Rev. 3.00 Sep 27, 2006 page 197 of 872
CPU cycle
Section 7 Refresh Controller
Refresh cycle
REJ09B0325-0300