MC68HC908JB16DW Freescale Semiconductor, MC68HC908JB16DW Datasheet - Page 68

• Manufacturer Part Number: MC68HC908JB16DW
• Description: IC MCU 16K FLASH 6MHZ USB 28SOIC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908JB16DW

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 6MHz
• Connectivity: SCI, USB
• Peripherals: LED, LVD, POR, PWM
• Number Of I /o: 21
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

FLASH Memory
4.9.1 Variables
4.9.2 ERASE Routine
Technical Data
68
NOTE:
The ROM-resident routines use three variables: CTRLBYT, CPUSPD
and LADDR; and one data buffer. The minimum size of the data buffer
is one byte and the maximum size is 64 bytes.
CPUSPD must be set before calling the erase or programming routines,
and should be set to four times the value of the CPU internal bus speed
in MHz. For example: for CPU speed of 6MHz, CPUSPD should be set
to 24.
The ERASE routine erases the entire or a block of FLASH memory. The
routine does not check for a blank range before or after erase.
A block erase cannot be performed on the last block of FLASH memory
(user vector at $FFD0)–$FFFF).
CTRLBYT
DATABUF
CPUSPD
Variable
LADDR
Routine
Calling Address
Stack Use
Input
Table 4-2. Summary of FLASH Routine Variables
$008A–$008B
$0100–$013F
FLASH Memory
Address
$0088
$0089
ERASE
$FC06
5 Bytes
CPUSPD — CPU speed
HX —
CTRLBYT — Mass or block erase
Table 4-3. ERASE Routine
Control byte for setting mass or block erase.
Timing adjustment for different CPU speeds.
Last FLASH address to be programmed.
Data buffer for programming and verifying.
Mass erase if bit 6 = 1
Block erase if bit 6 = 0
Contains any address in the range to be
erased
Description
MC68HC908JB16
Freescale Semiconductor
—
Rev. 1.1