S29GL01GP12TFI010 Spansion Inc., S29GL01GP12TFI010 Datasheet - Page 53

• Manufacturer Part Number: S29GL01GP12TFI010
• Description: Flash 3V 1 Gb Mirrorbit highest address120ns
• Manufacturer: Spansion Inc.

Specifications of S29GL01GP12TFI010

• Memory Type: NOR
• Memory Size: 1 Gbit
• Access Time: 110 ns
• Data Bus Width: 8 bit, 16 bit
• Architecture: Uniform
• Interface Type: Page-mode
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 50 mA
• Mounting Style: SMD/SMT
• Operating Temperature: + 85 C
• Package / Case: TSOP-56
• Memory Configuration: 128K X 16
• Ic Interface Type: Parallel
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: BGA
• No. Of Pins: 56
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

11. Electrical Specifications
11.1
November 28, 2007 S29GL-P_00_A8
Absolute Maximum Ratings
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may undershoot V
2. Minimum DC input voltage on pins A9 and ACC is -0.5V. During voltage transitions, A9 and ACC may overshoot V
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only;
Description
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current (Note 3)
to 20 ns. See
V
of up to 20 ns. See
ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
CC
+ 2.0 V for periods up to 20 ns. See
D a t a
Figure
Figure
11.1. Maximum DC voltage on input or I/Os is V
S h e e t
11.1. Maximum DC voltage on pins A9 and ACC is +12.5 V, which may overshoot to 14.0 V for periods up to 20
+0 .8 V
+2.0 V
+0.5 V
+2.0 V
–0 .5 V
–2 .0 V
Figure 11.1 Maximum Negative Overshoot Waveform
Figure 11.2 Maximum Positive Overshoot Waveform
V
V
S29GL-P MirrorBit
CC
CC
( P r e l i m i n a r y )
Figure
11.2.
All Inputs and I/Os except as noted below
(Note 1)
V
V
A9 and ACC (Note 2)
CC
IO
20 ns
20 ns
(Note 1)
®
Flash Family
CC
20 n s
20 ns
+ 0.5 V. During voltage transitions inputs or I/Os may overshoot to
20 ns
20 ns
SS
–0.5 V to V
–0.5 V to +12.5 V
to –2.0 V for periods of up
–65°C to +150°C
–65°C to +125°C
–0.5 V to +4.0 V
–0.5V to +4.0V
SS
200 mA
Rating
to –2.0 V for periods
CC
+ 0.5 V
53