CS42518-CQZR Cirrus Logic Inc, CS42518-CQZR Datasheet - Page 78

Audio CODECs IC 110dB 192kHz 8Ch Mlt-Ch CODEC

CS42518-CQZR

Manufacturer Part Number
CS42518-CQZR
Description
Audio CODECs IC 110dB 192kHz 8Ch Mlt-Ch CODEC
Manufacturer
Cirrus Logic Inc
Datasheet

Specifications of CS42518-CQZR

Number Of Adc Inputs
2
Number Of Dac Outputs
8
Conversion Rate
192 KSPs
Interface Type
Serial (I2C, SPI)
Resolution
24 bit
Maximum Operating Temperature
+ 70 C
Mounting Style
SMD/SMT
Package / Case
LQFP-64
Minimum Operating Temperature
- 10 C
Number Of Channels
2 ADC, 8 DAC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CS42518-CQZR
Manufacturer:
INTEL
Quantity:
307
Part Number:
CS42518-CQZR
Manufacturer:
Cirrus Logic Inc
Quantity:
10 000
Part Number:
CS42518-CQZR
Manufacturer:
CIRRUSLOGIC
Quantity:
20 000
CS42518
The external PLL component values listed in
Table 21
have a high corner-frequency jitter-attenuation
curve, take a short time to lock, and offer good output jitter performance. It should be noted that the PLL
component values shown must be used with their associated locking modes as shown in
Table
21. Use
of any other combinations of component values and locking modes may result in unstable PLL behavior.
Configuration 1 may be used for hardware and software backward-compatibility for designs originally
made with the CS42518 Revision C.
Configuration 2 may be used for hardware-only backward-compatibility for designs originally made with
the CS42518 Revision C. Using the Revision D default locking mode of ‘01’ will provide improved wide-
band jitter rejection in Double- and Quad-Speed modes.
Configuration 3 may be used for new designs with the CS42518 Revision D, or for existing designs in
which the hardware and software may be changed to use the specified PLL component values and
LOCKM[1:0] register setting. This configuration provides the best DAC and ADC performance when
clocked from the PLL recovered clock.
The Typical Connection Diagram, Figure 5, shows the recommended configuration of the two capacitors
and one resistor that comprise the PLL filter. It is important to treat the LPFILT pin as a low-level analog
input. It is suggested that the ground end of the PLL filter be returned directly to the AGND pin indepen-
dently of the digital ground plane.
78
DS584F1

Related parts for CS42518-CQZR