PIC32MX575F256LT-80I/PT Microchip Technology, PIC32MX575F256LT-80I/PT Datasheet - Page 3

• Manufacturer Part Number: PIC32MX575F256LT-80I/PT
• Description: 256KB Flash, 64KB RAM, 80 MHz, USB, 1xCAN, 8 DMA 100 TQFP 12x12x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX575F256LT-80I/PT

• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: CAN, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.
9.
10. Verify the program memory.
11. Exit the Programming mode.
© 2010 Microchip Technology Inc.
Initiate Flash Write.
After downloading each block of data into RAM,
the programming sequence must be started to
program it into the target device’s Flash
memory.
See 13.0 “Initiating a Flash Row Write” for
more information.
Repeat Steps 7 and 8 until all data blocks are
downloaded and programmed.
After all programming data and Configuration
bits are programmed, the target device memory
should be read back and verified for the
matching content.
See 14.0 “Verify Device Memory” for more
information.
The newly programmed data is not effective until
either power is removed and reapplied to the
target device or an exit programming sequence
is performed.
See 15.0 “Exiting Programming Mode” for
more information.
PIC32MX
DS61145G-page 3