PIC32MX575F256LT-80I/PT Microchip Technology, PIC32MX575F256LT-80I/PT Datasheet - Page 8

• Manufacturer Part Number: PIC32MX575F256LT-80I/PT
• Description: 256KB Flash, 64KB RAM, 80 MHz, USB, 1xCAN, 8 DMA 100 TQFP 12x12x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX575F256LT-80I/PT

• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: CAN, I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC32MX
5.1
The 4-wire interface uses standard JTAG (IEEE
1149.1-2001) interface signals.
• TCK: Test Clock – drives data in/out
• TMS: Test Mode Select – selects operational mode
• TDI: Test Data In – data into the device
• TDO: Test Data Out – data out of the device
Since only one data line is available, the protocol is
necessarily serial (like SPI). The clock input is at the
TCK pin. Configuration is performed by manipulating a
state machine bit by bit through the TMS pin. One bit of
data is transferred in and out per TCK clock pulse at the
TDI and TDO pins, respectively. Different instruction
modes can be loaded to read the chip ID or manipulate
chip functions.
Data presented to TDI must be valid for a chip-specific
setup time before, and hold time, after the rising edge
of TCK. TDO data is valid for a chip-specific time after
the falling edge of TCK (refer to Figure 5-3).
FIGURE 5-3:
DS61145G-page 8
TMS
TCK
TDO
TDI
4-Wire JTAG Details
‘1’
4-WIRE JTAG INTERFACE
‘1’
‘0’
‘0’
oLSb
iLSb
‘1’
oMSb
iMSb
© 2010 Microchip Technology Inc.
‘1’
‘0’