PSB2115HV1.2 Lantiq, PSB2115HV1.2 Datasheet - Page 14

no-image

PSB2115HV1.2

Manufacturer Part Number
PSB2115HV1.2
Description
Manufacturer
Lantiq
Datasheet

Specifications of PSB2115HV1.2

Lead Free Status / Rohs Status
Supplier Unconfirmed

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PSB2115HV1.2
Manufacturer:
INFINEON
Quantity:
8 000
Part Number:
PSB2115HV1.2
Manufacturer:
ST
0
Part Number:
PSB2115HV1.2
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
PSB 2115
PSF 2115
Overview
1
Overview
The ISDN PC Adapter Circuit IPAC integrates all necessary functions for a host based
ISDN access solution on a single chip.
It includes the S-transceiver (Layer 1), an HDLC controller for the D-channel and two
protocol controllers for each B-channel. They can be used for HDLC protocol or
transparent access. The system integration is simplified by several host interface
configurations selected via pin strapping. They include multiplexed and demultiplexed
interface options as well as the optional indirect register access mechanism which
reduces the number of necessary registers in the address space to 2 locations.
The IPAC combines the functions of the ISDN Subscriber Access Controller (ISAC-S
PEB 2086) and the High-Level Serial Communications Controller Extended for
Terminals (HSCX-TE PSB 21525) providing additional features and enhanced
functionality.
The FIFO size of the B-channel buffers is 2x64 bytes per channel and per direction. The
S-transceiver supports other terminal relevant operation modes like line termination
subscriber side (LT-S) and line termination trunk side (LT-T). A multi-line ISDN solution
to support both S and U (2B1Q) line coding is simplified as well as multi-line solution with
up to 3 S-interfaces.
An auxiliary I/O port has been added with interrupt capabilities on two input lines. These
programmable I/O lines may be used to connect a DTMF receiver or other peripheral
components to the IPAC which need software control or have to forward status
information to the host. Peripheral data controllers can transfer data on a PCM interface
which is mapped into the B-channels on the IOM-2 interface.
Three programmable LED outputs can be used to indicate certain status information,
one of them is capable to indicate the activation status of the S-interface automatically.
The IPAC is produced in advanced CMOS technology.
Semiconductor Group
14
11.97

Related parts for PSB2115HV1.2