TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 372

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

22.8
Operation Commands
RA003
5. Flash memory SUM output command
6. Product ID code output command
7. Flash memory status output command
8. Mask ROM emulation setting command
9. Flash memory security setting command
program is enabled, the RAM loader command is not executed. In this case, execute Chip Erase beforehand
by using the flash memory erase command. Before executing the RAM loader command, the TMP89FS60
performs password authentication except where a product is blank. If a password is not authenticated, the
RAM loader command is not executed.
results are returned.
and on the RAM area respectively. The external controller reads this code to identify the product to which
data is to be written.
reads this code to identify the status of flash memory.
mode, the flash memory write command and RAM loader command are prohibited. To disable the flash
memory security program, execute Chip Erase by using the flash memory erase command.
flash memory of more than 96Kbytes.
Checksums in the entire flash memory area (0x1000 through 0xFFFF) are calculated, and the calculation
This is a code output used to identify a product. The output code consists of information on the ROM area
The status of 0xFFE0 through 0xFFFF and that of the security program are output. The external controller
This command is used to prohibit the reading of data in flash memory in parallel mode. In serial PROM
This command is nonfunctional in the TMP89FS60. It becomes functional if used for a product with
Page 356
TMP89FS60