S9S12GN16F0CFT Freescale Semiconductor, S9S12GN16F0CFT Datasheet - Page 1184

• Manufacturer Part Number: S9S12GN16F0CFT
• Description: 16-bit Microcontrollers - MCU 16-bit16k Flash 2k RAM
• Manufacturer: Freescale Semiconductor

Specifications of S9S12GN16F0CFT

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 16 KB
• Data Ram Size: 1024 B
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: TSSOP-20
• Mounting Style: SMD/SMT

240 KByte Flash Module (S12FTMRG240K2V1)
31.4.7.1
The Flash module uses the CCIF flag in combination with the CCIE interrupt enable bit to generate the
Flash command interrupt request. The Flash module uses the DFDIF and SFDIF flags in combination with
the DFDIE and SFDIE interrupt enable bits to generate the Flash error interrupt request. For a detailed
description of the register bits involved, refer to
(FCNFG)”,
Status Register
The logic used for generating the Flash module interrupts is shown in
31.4.8
The Flash module is not affected if the MCU enters wait mode. The Flash module can recover the MCU
from wait via the CCIF interrupt (see
31.4.9
If a Flash command is active (CCIF = 0) when the MCU requests stop mode, the current Flash operation
will be completed before the MCU is allowed to enter stop mode.
1186
Section 31.3.2.6, “Flash Error Configuration Register
Wait Mode
Stop Mode
Description of Flash Interrupt Operation
Vector addresses and their relative interrupt priority are determined at the
MCU level.
(FSTAT)”, and
DFDIE
DFDIF
SFDIE
SFDIF
CCIE
CCIF
Figure 31-27. Flash Module Interrupts Implementation
Section 31.3.2.8, “Flash Error Status Register
MC9S12G Family Reference Manual,
Section 31.4.7,
Section 31.3.2.5, “Flash Configuration Register
NOTE
“Interrupts”).
Flash Command Interrupt Request
Flash Error Interrupt Request
(FERCNFG)”,
Rev.1.23
Figure
31-27.
(FERSTAT)”.
Section 31.3.2.7, “Flash
Freescale Semiconductor