S9S12GN16F0CFT Freescale Semiconductor, S9S12GN16F0CFT Datasheet - Page 182

• Manufacturer Part Number: S9S12GN16F0CFT
• Description: 16-bit Microcontrollers - MCU 16-bit16k Flash 2k RAM
• Manufacturer: Freescale Semiconductor

Specifications of S9S12GN16F0CFT

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 16 KB
• Data Ram Size: 1024 B
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: TSSOP-20
• Mounting Style: SMD/SMT

Port Integration Module (S12GPIMV1)
184
PAD5
PAD4
• 32 LQFP: The ACMPO signal of the analog comparator is mapped to this pin when used with the
• 20 TSSOP: The inverting input signal ACMPM of the analog comparator is mapped to this pin when
• The ADC analog input channel signal AN5 and the related digital trigger input are mapped to this pin.
• 20 TSSOP: The SCI0 TXD signal is mapped to this pin. If the SCI0 TXD signal is enabled the I/O state
• 20 TSSOP: The TIM channel 3 signal is mapped to this pin. The TIM forces the I/O state to be an output
• 20 TSSOP: The PWM channel 3 signal is mapped to this pin. If the PWM channel is enabled and
• 20 TSSOP: The ADC ETRIG3 signal is mapped to this pin if PWM channel 3 is routed here. The
• Pin interrupts can be generated if enabled in digital input or output mode.
• Signal priority:
• 20 TSSOP: The non-inverting input signal ACMPP of the analog comparator is mapped to this pin
• The ADC analog input channel signal AN4 and the related digital trigger input are mapped to this pin.
• 20 TSSOP: The SCI0 RXD signal is mapped to this pin. If the SCI0 RXD signal is enabled and routed
• 20 TSSOP: The TIM channel 2 signal is mapped to this pin. The TIM forces the I/O state to be an output
• 20 TSSOP: The PWM channel 2 signal is mapped to this pin. If the PWM channel is enabled and
• 20 TSSOP: The ADC ETRIG2 signal is mapped to this pin if PWM channel 2 is routed here. The
• Pin interrupts can be generated if enabled in digital input or output mode.
• Signal priority:
ACMP function. If the ACMP output is enabled (ACMPC[ACOPE]=1) the I/O state will be forced to
output.
used with the ACMP function. The ACMP function has no effect on the output state. Refer to
NOTE/2-180
The ADC function has no effect on the output state. Refer to
will depend on the SCI0 configuration.
for a timer port associated with an enabled output compare.
routed here the I/O state is forced to output.
enabled external trigger function has no effect on the I/O state. Refer to
Triggers
32 LQFP: ACMPO > GPO
20 TSSOP: TXD0 > IOC3 > PWM3 > GPO
Others: GPO
when used with the ACMP function. The ACMP function has no effect on the output state. Refer to
NOTE/2-180
The ADC function has no effect on the output state. Refer to
here the I/O state will be forced to input.
for a timer port associated with an enabled output compare.
routed here the I/O state is forced to output.
enabled external trigger function has no effect on the I/O state. Refer to
Triggers
20 TSSOP: RXD0 > IOC2 > PWM2 > GPO
Others: GPO
ETRIG3-0”.
ETRIG3-0”.
for input buffer control.
for input buffer control.
Table 2-17. Port
MC9S12G Family Reference Manual,
AD
Pins AD7-0 (continued)
Rev.1.23
NOTE/2-180
NOTE/2-180
Section 2.6.4, “ADC External
Section 2.6.4, “ADC External
for input buffer control.
for input buffer control.
Freescale Semiconductor