LTC3829EFE#PBF Linear Technology, LTC3829EFE#PBF Datasheet - Page 10

• Manufacturer Part Number: LTC3829EFE#PBF
• Description: IC BUCK SYNC ADJ 38TSSOP
• Manufacturer: Linear Technology
• Type: Step-Down (Buck)r

Specifications of LTC3829EFE#PBF

• Internal Switch(s): No
• Synchronous Rectifier: Yes
• Number Of Outputs: 1
• Voltage - Output: 0.6 ~ 5 V
• Frequency - Switching: 250kHz ~ 770kHz
• Voltage - Input: 4.5 ~ 38 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 38-TSSOP Exposed Pad, 38-eTSSOP, 38-HTSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Power - Output: -

LTC3829
pin FuncTions
BOOST1, BOOST2, BOOST3 (Pins 33, 26, 19/Pins 35,
28, 21): Boosted Floating Driver Supplies. The (+) terminal
of the bootstrap capacitors connect to these pins. These
pins swing from a diode voltage drop below INTV
to V
CLKOUT (Pin 34/Pin 36): Clock Output Pin. CLKOUT is
60° out of phase relative to channel 1 in non-shedding
mode. During stage shedding, CLKOUT is 180° out of
phase with channel 1.
MODE (Pin 35/Pin 37): Forced Continuous Mode, Burst
Mode or Shed Mode Selection Pin. Connect this pin to
SGND to force IC in continuous mode of operation. Con-
nect to INTV
pin floating to enable Burst Mode operation.
IFAST (Pin 36/Pin 38): Programmable Pin for Nonlinear
Control Trip Threshold. A resistor to ground programs the
tripping threshold for nonlinear control circuit. Connect
this pin to INTV
Information section for details.
0
IN
+ INTV
CC
CC
to enable shed mode operation. Leave the
CC
.
to disable this feature. See Applications
(UHF/FE)
CC
up
ITEMP (Pin 37/Pin 1): Input of the Temperature Sensing
Comparator. Connect this pin to external NTC resistors
placed near inductors.
DIFFOUT (Pin 38/Pin 2): Output of Remote Sensing
Differential Amplifier. Connect this pin to V
resistive divider.
SGND/PGND (Exposed Pad Pin 39/Exposed Pad Pin 39):
Combined Signal and Power Ground Pad. Connect this pad
closely to the sources of the bottom N-channel MOSFETs,
the (–) terminal of C
small-signal components and compensation components
should also Kelvin-connect to this pad.
VCC
and the (–) terminal of C
FB
through a
IN
. All
3829f