QW1 TechTools, QW1 Datasheet - Page 177

• Manufacturer Part Number: QW1
• Description: PROGRAMMER PIC MCU QUICKWRITER
• Manufacturer: TechTools
• Series: QuickWriter™r
• Type: QuickWriterr

Specifications of QW1

• Contents: MCU Programmer with In-Circuit Serial Programming Cable and Optional GANG Adapters
• For Use With/related Products: PIC Micro® MCU
• For Use With: CBL-ICSP - CABLE PROG QUICKWRITER SERIALQW-4SSOP18 - ADAPTER QUICKWRITER 4GANG 18SSOPQW-4SSOP28 - ADAPTER QUICKWRITER 4GANG 28SSOPQW-4SO8/14W - ADAPT QUICKWRTR 4GANG 8/14SOIC WQW-4SO8/14N - ADAPT QUICKWRTR 4GANG 8/14SOIC NQW-4SOIC18 - ADAPTER QUICKWRITER 4GANG 18SOICQW-4ZIF18 - ADAPTER QUICKWRITER 4-GANG 18ZIFQW-4SOIC28 - ADAPTER QUICKWRITER 4GANG 28SOICQW-4PLCC44 - ADAPTER QUICKWRITER 4GANG 44PLCCQW-4ZIF40/28 - ADAPT QUICKWRITER 4GANG 40/28ZIFMP-ZIF14 - ADAPTER QUICKWRITER 14-PIN ZIFMP-SOIC8/14 - ADAPTER QUICKWRITER 8/14-SOICMP-SSOP18 - ADAPTER QUICKWRITER 18-SSOPMP-SSOP28 - ADAPTER QUICKWRITER 28-SSOPMP-14000 - ADAPTR QUICKWRTR PIC14000 28-PINMP-SOIC18 - ADAPTER QUICKWRITER 18-SOICMP-SOIC28 - ADAPTER QUICKWRITER 28-SOICMP-PLCC44 - ADAPTER QUICKWRITER 44-PIN PLCCMP-ZIF18/28 - ADAPTER QUICKWRITER 18/28PIN ZIFMP-ZIF40 - ADAPTER QUICKWRITER 40-PIN ZIF

© 2007 TechTools
4.2.24 MOV [to I/O Control]
MOV
MOV
MOV
a regular MOV is possible, as long as your program is in the proper bank (usually bank 1).
Microchip may remove the OPTION instruction in newer PICs, so they recommend
against using the ‘ ! ’
NOTE: Since TRIS registers on 'xx devices are readable and writable, they can be
accessed as a normal File Register. To maintain upward compatibility with future devices,
the " ! " qualifier should not be used when coding for 'xx devices.
Words:
Operation:
W disables the corresponding port pin’s output buffer, allowing input use, while a "0" bit
enables the output buffer for high or low output. Port_fr must be (at Address) 5, 6, or 7.
Coding: MOVLW
Words:
Operation:
disables the corresponding port pin’s output buffer, allowing input use, while a "0" bit
enables the output buffer for high or low output. Z will be set to 1 if the value moved was
0, otherwise Z will be cleared to 0. Port_fr must be (at Address) 5, 6, or 7.
Coding: MOVF fr,0
Words:
Operation:
disables the corresponding port pin’s output buffer, allowing input use, while a "0" bit
enables the output buffer for high or low output. Port_fr must be (at Address) 5, 6, or 7.
!port_fr,#literal Move literal into port_fr’s I/O control register
!port_fr,fr
TRIS
!port_fr,W
2
TRIS
2
1
Cycles: 2
Literal is moved into the I/O control register of port_fr via W. A "1" bit in
Move fr into port_fr’s I/O control register
Cycles: 2
Fr is moved into the I/O control register of port_fr via W. A "1" bit in W
port_fr6
Move W into port_fr’s I/O control register
Cycles: 1
W is moved into the I/O control register of port_fr. A "1" bit in W
literal
port_fr
Affects: none
Affects: Z
Affects: none
ClearView Assembler
171