QW1 TechTools, QW1 Datasheet - Page 208

• Manufacturer Part Number: QW1
• Description: PROGRAMMER PIC MCU QUICKWRITER
• Manufacturer: TechTools
• Series: QuickWriter™r
• Type: QuickWriterr

Specifications of QW1

• Contents: MCU Programmer with In-Circuit Serial Programming Cable and Optional GANG Adapters
• For Use With/related Products: PIC Micro® MCU
• For Use With: CBL-ICSP - CABLE PROG QUICKWRITER SERIALQW-4SSOP18 - ADAPTER QUICKWRITER 4GANG 18SSOPQW-4SSOP28 - ADAPTER QUICKWRITER 4GANG 28SSOPQW-4SO8/14W - ADAPT QUICKWRTR 4GANG 8/14SOIC WQW-4SO8/14N - ADAPT QUICKWRTR 4GANG 8/14SOIC NQW-4SOIC18 - ADAPTER QUICKWRITER 4GANG 18SOICQW-4ZIF18 - ADAPTER QUICKWRITER 4-GANG 18ZIFQW-4SOIC28 - ADAPTER QUICKWRITER 4GANG 28SOICQW-4PLCC44 - ADAPTER QUICKWRITER 4GANG 44PLCCQW-4ZIF40/28 - ADAPT QUICKWRITER 4GANG 40/28ZIFMP-ZIF14 - ADAPTER QUICKWRITER 14-PIN ZIFMP-SOIC8/14 - ADAPTER QUICKWRITER 8/14-SOICMP-SSOP18 - ADAPTER QUICKWRITER 18-SSOPMP-SSOP28 - ADAPTER QUICKWRITER 28-SSOPMP-14000 - ADAPTR QUICKWRTR PIC14000 28-PINMP-SOIC18 - ADAPTER QUICKWRITER 18-SOICMP-SOIC28 - ADAPTER QUICKWRITER 28-SOICMP-PLCC44 - ADAPTER QUICKWRITER 44-PIN PLCCMP-ZIF18/28 - ADAPTER QUICKWRITER 18/28PIN ZIFMP-ZIF40 - ADAPTER QUICKWRITER 40-PIN ZIF

202
PicTools Manual 3.0
1)
plug it into ClearView’s trace buffer slot. When plugged in properly, the
components on the module should face the words "ClearView Mathias" on the
emulator.
2)
As with the trace buffer module, the components on the module should face the
words "ClearView Mathias."
3)
member module is for "5x" PICs, then you must have a "5x" family module
plugged into the family slot (see step #2). If the member module is for any "xx"
PIC (61, 71, 84,...), then you must have an "xx" module plugged into the family
slot.
4)
will have connectors for 18-, 28-, and/or 40-pin cables. The type of cable used
will depend on which PIC you plan to emulate (for 16C61, an 18-pin cable; for
16C73, a 28-pin cable; etc).
If you purchased the optional trace buffer module or timing module,
Plug a "5x" or "xx" family module into ClearView’s family module slot.
Plug a PIC member module into the right side of the emulator. If the
Plug an appropriate ribbon cable onto the member module. The module
© 2007 TechTools