ATMEGA324PV-10AU Atmel, ATMEGA324PV-10AU Datasheet - Page 288

• Manufacturer Part Number: ATMEGA324PV-10AU
• Description: IC MCU AVR 32K FLASH 44-TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA324PV-10AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: ATMEGA32x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: 2-Wire/JTAG/SPI/USART
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Package: 44TQFP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 10 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Controller Family/series: AVR MEGA
• No. Of I/o's: 32
• Eeprom Memory Size: 1KB
• Ram Memory Size: 2KB
• Cpu Speed: 10MHz
• Rohs Compliant: Yes
• For Use With: ATSTK600-TQFP44 - STK600 SOCKET/ADAPTER 44-TQFPATSTK600-DIP40 - STK600 SOCKET/ADAPTER 40-PDIP770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1005 - ISP 4PORT FOR ATMEL AVR MCU JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPIATAVRISP2 - PROGRAMMER AVR IN SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

23.8.14
In
Table 23-7.
Note:
Table 23-8.
Note:
Table 23-9.
Note:
See
Programming.
8011O–AVR–07/10
BOOTSZ1
Section
Read-While-Write section (RWW)
No Read-While-Write section (NRWW)
Variable
PCMSB
PAGEMSB
ZPCMSB
ZPAGEMSB
PCPAGE
PCWORD
Table 23-7
”Addressing the Flash During Self-Programming” on page 281
1
1
0
0
1. The different BOOTSZ Fuse configurations are shown in
1. For details about these two section, see
1. Z0: should be zero for all SPM commands, byte select for the (E)LPM instruction.
ATmega164P Boot Loader Parameters
Write Section” on page
through
BOOTSZ0
Boot Size Configuration
Read-While-Write Limit
Explanation of different variables used in
1
0
1
0
PC[12:6]
PC[5:0]
12
Table
5
Boot Size
1024 words
128 words
256 words
512 words
23-9, the parameters used in the description of the Self-Programming are given.
Corresponding
277.
Z-value
Z14:Z7
Z6:Z1
Z13
Z6
(1)
(1)
Pages
16
2
4
8
”NRWW – No Read-While-Write Section” on page 277
Description
Most significant bit in the Program Counter. (The Program Counter is 13 bits
PC[12:0])
Most significant bit which is used to address the words within one page (128
words in a page requires seven bits PC [5:0]).
Bit in Z-pointer that is mapped to PCMSB. Because Z0 is not used, the
ZPCMSB equals PCMSB + 1.
Bit in Z-pointer that is mapped to PCMSB. Because Z0 is not used, the
ZPAGEMSB equals PAGEMSB + 1.
Program Counter page address: Page select, for Page Erase and Page Write
Program Counter word address: Word select, for filling temporary buffer (must
be zero during Page Write operation)
Application
Flash Section
0x0000 - 0x1F7F
0x0000 - 0x1EFF
0x0000 - 0x1DFF
0x0000 - 0x1BFF
Figure 23-3 on page 281
(1)
Figure 23-2 on page
Pages
112
16
0x1F00 - 0x1FFF
Boot Loader
Flash Section
0x1F80 - 0x1FFF
0x1E00 - 0x1FFF
0x1C00 - 0x1FFF
for details about the use of Z-pointer during Self-
ATmega164P/324P/644P
279.
and the mapping to the Z-pointer
End
Application
Section
0x1F7F
0x1EFF
0x1DFF
0x1BFF
Address
0x0000 - 0x1BFF
0x1C00 - 0x1FFF
and
”RWW – Read-While-
Boot Reset
Address
(Start Boot
Loader Section)
0x1F80
0x1F00
0x1E00
0x1C00
288