ATMEGA324PV-10AU Atmel, ATMEGA324PV-10AU Datasheet - Page 296

• Manufacturer Part Number: ATMEGA324PV-10AU
• Description: IC MCU AVR 32K FLASH 44-TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA324PV-10AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: ATMEGA32x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: 2-Wire/JTAG/SPI/USART
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Package: 44TQFP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 10 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Controller Family/series: AVR MEGA
• No. Of I/o's: 32
• Eeprom Memory Size: 1KB
• Ram Memory Size: 2KB
• Cpu Speed: 10MHz
• Rohs Compliant: Yes
• For Use With: ATSTK600-TQFP44 - STK600 SOCKET/ADAPTER 44-TQFPATSTK600-DIP40 - STK600 SOCKET/ADAPTER 40-PDIP770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1005 - ISP 4PORT FOR ATMEL AVR MCU JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPIATAVRISP2 - PROGRAMMER AVR IN SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

24.2.1
24.3
24.4
24.5
Table 24-7.
Table 24-8.
8011O–AVR–07/10
ATmega164P
ATmega324P
ATmega644P
ATmega164P
ATmega324P
ATmega644P
Device
Device
Signature Bytes
Calibration Byte
Page Size
Latching of Fuses
No. of Words in a Page and No. of Pages in the Flash
No. of Words in a Page and No. of Pages in the EEPROM
8K words (16 Kbytes)
16K words (32 Kbytes)
32K words (64 Kbytes)
EEPROM Size
Flash Size
512 bytes
The fuse values are latched when the device enters programming mode and changes of the
fuse values will have no effect until the part leaves Programming mode. This does not apply to
the EESAVE Fuse which will take effect once it is programmed. The fuses are also latched on
Power-up in Normal mode.
All Atmel microcontrollers have a three-byte signature code which identifies the device. This
code can be read in both serial and parallel mode, also when the device is locked. The three
bytes reside in a separate address space. For the ATmega164P/324P/644P the signature bytes
are given in
Table 24-6.
The ATmega164P/324P/644P has a byte calibration value for the internal RC Oscillator. This
byte resides in the high byte of address 0x000 in the signature address space. During reset, this
byte is automatically written into the OSCCAL Register to ensure correct frequency of the cali-
brated RC Oscillator.
1 Kbytes
2 Kbytes
Part
ATmega164P
ATmega324P
ATmega644P
Table
Device and JTAG ID
24-6.
Page Size
128 words
Page Size
64 words
64 words
0x000
4 bytes
4 bytes
8 bytes
0x1E
0x1E
0x1E
Signature Bytes Address
0x001
0x94
0x95
0x96
PCWORD
PCWORD
EEA[1:0]
EEA[1:0]
EEA[2:0]
PC[5:0]
PC[5:0]
PC[6:0]
0x002
0x0A
0x08
0x0A
ATmega164P/324P/644P
No. of Pages
No. of Pages
128
256
256
128
256
256
Part Number
940A
960A
9508
EEA[10:3]
PCPAGE
PCPAGE
PC[12:6]
EEA[8:2]
EEA[9:2]
PC[13:6]
PC[14:7]
JTAG
Manufacture ID
0x1F
0x1F
0x1F
EEAMSB
PCMSB
10
12
13
14
8
9
296