AT32UC3L064-AUT Atmel, AT32UC3L064-AUT Datasheet - Page 700

• Manufacturer Part Number: AT32UC3L064-AUT
• Description: MCU AVR32 64KB FLASH 48TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L064-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP, 48-VQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI/TWI/USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Package: 48TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

28.8
28.8.1
32099F–11/2010
Module Configuration
Resistive Drive
The specific configuration the CAT module is listed in the following tables.The module bus
clocks listed here are connected to the system bus clocks. Please refer to the Power Manager
chapter for details.
Table 28-4.
Table 28-5.
Table 28-6.
By default, the CAT pins are driven with normal I/O drive properties. Some of the CSA and CSB
pins can optionally drive with a 1k output resistance for improved EMC.
To enable resistive drive on a pin, the user must write a one to the corresponding bit in the CSA
Resistor Control Register (CSARES) or CSB Resistor Control Register (CSBRES) register.
Feature
Number of touch sensors/Size of matrix
Clock Name
CLK_CAT
GCLK
Register
VERSION
PARAMETER
Module Configuration
CAT Clocks
Register Reset Values
Reset Value
0x00000200
0x0001FFFF
Description
Clock for the CAT bus interface
The generic clock used for the CAT is GCLK4
CAT
Allows up to 17 touch sensors, or up to 16 by 8
matrix sensors to be interfaced.
AT32UC3L016/32/64
700