AT32UC3L064-AUT Atmel, AT32UC3L064-AUT Datasheet - Page 710

• Manufacturer Part Number: AT32UC3L064-AUT
• Description: MCU AVR32 64KB FLASH 48TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L064-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP, 48-VQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI/TWI/USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Package: 48TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

30. aWire UART (AW)
30.1
30.2
30.3
Figure 30-1. aWire Debug Interface Block Diagram
32099F–11/2010
Features
Overview
Block Diagram
AW User Interface
RW
PB
SZ
AW CONTROL
SAB interface
Rev.: 2.1.0.0
•
•
If the AW is not used for debugging, the aWire UART can be used by the user to send or receive
data with one start bit, eight data bits, no parity bits, and one stop bit. This can be controlled
through the aWire UART user interface.
This chapter only describes the aWire UART user interface. For a description of the aWire
Debug Interface, please see the Programming and Debugging chapter.
Asynchronous receiver or transmitter when the aWire system is not used for debugging.
One- or two-pin operation supported.
ADDR
SAB
aWire Debug Interface
DATA
CHIP_ERASE command
HALT command
RESET command
Baudrate Detector
AW_ENABLE
UART
CRC
AT32UC3L016/32/64
External reset
Manager
Controller
Power
Reset
Flash
filter
CPU
RESET_N
710