DSPIC30F2020-30I/MM Microchip Technology, DSPIC30F2020-30I/MM Datasheet - Page 193

• Manufacturer Part Number: DSPIC30F2020-30I/MM
• Description: IC DSPIC MCU/DSP 12K 28QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2020-30I/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Core Frequency: 15MHz
• Core Supply Voltage: 3.3V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 12KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28QFN-S EP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCKAC164322 - MODULE SOCKET MPLAB PM3 28/44QFNDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

17.0
The dsPIC30F SMPS Comparator module monitors
current and/or voltage transients that may be too fast
for the CPU and ADC to capture.
17.1
• 16 comparator inputs
• 10-bit DAC provides reference
FIGURE 17-1:
17.2
This module provides a means for the SMPS dsPIC
DSC devices to monitor voltage and currents in a
power conversion application. The ability to detect
transient conditions and stimulate the dsPIC DSC pro-
cessor and/or peripherals without requiring the proces-
sor and ADC to constantly monitor voltages or currents
frees the dsPIC DSC to perform other tasks.
The Comparator module has a high-speed comparator
and an associated 10-bit DAC that provides a pro-
grammable reference voltage to one input of the com-
parator. The polarity of the comparator output is user
programmable. The output of the module can be used
in the following modes:
• Generate an interrupt
• Trigger an ADC sample and convert process
• Truncate the PWM signal (current limit)
• Truncate the PWM period (current minimum)
© 2006 Microchip Technology Inc.
EXTREF
Note: This data sheet summarizes features of this group
of dsPIC30F devices and is not intended to be a complete
reference source. For more information on the CPU,
peripherals, register descriptions and general device
functionality, refer to the “dsPIC30F Family Reference
Manual” (DS70046).
CMP
CMP
CMP
CMP
AV
INTREF
* x=1, 2, 3 & 4
DD
x
x
x
x
/2
A*
B*
C*
D*
SMPS COMPARATOR MODULE
Features Overview
Module Applications
M
U
X
RANGE
M
U
X
A
VSS
INSEL<1:0>
CMREF
DAC
COMPARATOR MODULE BLOCK DIAGRAM
10
CMP
x
CMPPOL
*
Preliminary
1
0
• Programmable output polarity
• Interrupt generation capability
• Selectable Input sources
• DAC has three ranges of operation:
• ADC sample and convert trigger capability
• Can be disabled to reduce power consumption
• Functional support for PWM Module:
• Disable the PWM outputs (Fault-latch)
The output of the Comparator module may be used in
multiple modes at the same time, such as: (1) gener-
ate an interrupt, (2) have the ADC take a sample and
convert it and (3) truncate the PWM output in
response to a voltage being detected beyond its
expected value.
The Comparator module can also be used to wake-up
the system from Sleep or Idle mode when the analog
input voltage exceeds the programmed threshold
voltage.
Glitch Filter
- AV
- Internal Reference 1.2V 1%
- External Reference < (AV
- PWM Duty Cycle Control
- PWM Period Control
- PWM Fault Detect
dsPIC30F1010/202X
DD
/ 2
Pulse Generator
Trigger to PWM
DD
- 1.6V)
DS70178C-page 191
Interrupt Request
Status