SAF-TC1167-128F133HL AD Infineon Technologies, SAF-TC1167-128F133HL AD Datasheet - Page 96

• Manufacturer Part Number: SAF-TC1167-128F133HL AD
• Description: IC MCU 32BIT FLASH 176-LQFP
• Manufacturer: Infineon Technologies
• Series: TC116xr

Specifications of SAF-TC1167-128F133HL AD

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: ASC, CAN, EBI/EMI, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 88
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 32x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 176-LFQFP
• Data Bus Width: 32 bit
• Data Ram Size: 104 KB
• Interface Type: ASC, MLI, MSC, SSC
• Maximum Clock Frequency: 133 MHz
• Number Of Programmable I/os: 88
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (12 bit, 16 Channel) / 10 bit, 4 Channel
• Packages: PG-LQFP-176
• Max Clock Frequency: 133.0 MHz
• Sram (incl. Cache): 128.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 36
• Program Memory: 1.0 MB
• For Use With: B158-H8690-X-0-7600IN - KIT STARTER TC116X SERIES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000602800

12) Only one of these parameters is tested, the other is verified by design characterization.
13) The leakage current decreases typically 30% for junction temperature decrease of 10
14) Applies to AINx, when used as auxiliary reference inputs.
15)
16) For the definition of the parameters see also
17) This represents an equivalent switched capacitance. This capacitance is not switched to the reference voltage
18) The sampling capacity of the conversion C-Network is pre-charged to
19)
20) The DC current at the pin is limited to 3 mA for the operational lifetime.
Figure 17
Data Sheet
I
with a duration of up to
needs a total charge of
All ADC conversions with a duration longer than
at once. Instead of this smaller capacitances are successively switched to the reference voltage.
Because of the parasitic elements the voltage measured at AINx can deviate from
1.35V.
R
AREF_MAX
AIN7T
= 1400 Ohm maximum and 830 Ohm typical in the
is valid for the minimum specified conversion time. The current flowing during an ADC conversion
ADC kernel
ADC0/ADC1 Clock Circuit
interrupts,
registers
etc.
Q
t
C
CONV
= 25µs can be calculated with the formula
= 150pC from
V
Figure
analog part
generation
AREF
divider for
t
C
clock
f
.
ADCI
= 25µs consume an
91
18.
f
analog clock
f
ADC
ADCI
V
DDM
= 3.3V± 5% range.
divider for
I
AREF_MAX
V
I
arbiter
AREF_MAX
AREF
f
ADCD
/2 before the sampling moment.
digital clock
f
ADCD
ADC_clocking
Electrical Parameters
=
Q
= 6µA.
CONV
V
o
C.
AREF
/
t
C
. Every conversion
/2, and is typically
V1.3, 2009-10
TC1167