MCF5216CVF66 Freescale Semiconductor, MCF5216CVF66 Datasheet - Page 618

• Manufacturer Part Number: MCF5216CVF66
• Description: IC MPU 32BIT COLDF 256-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5216CVF66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Controller Family/series: ColdFire
• Ram Memory Size: 64KB
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of Pwm Channels: 8
• Operating Temperature Range: -40°C To +85°C
• No. Of Pins: 256
• Rohs Compliant: No
• Package: 256MA-BGA
• Device Core: ColdFire
• Family Name: MCF521x
• Maximum Speed: 66 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 142
• Interface Type: QSPI/UART/I2C/CAN
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 8
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Reset Controller Module
29.5.3.2 Reset Status Flags
For a POR reset, the POR and LVD bits in the RSR are set, and the SOFT, WDR, EXT, LOC, and LOL
bits are cleared even if another type of reset condition is detected during the reset sequence for the POR.
If a loss-of-clock or loss-of-lock condition is detected while waiting for the current bus cycle to complete
(5, 6) for an external reset request, the EXT, SOFT, and/or WDR bits along with the LOC and/or LOL bits
are set.
If the RSR bits are latched (7) during the EXT, SOFT, and/or WDR reset sequence with no other reset
conditions detected, only the EXT, SOFT, and/or WDR bits are set.
If the RSR bits are latched (4) during the internal reset sequence with the RSTI pin not asserted and no
SOFT or WDR event, then the LOC and/or LOL bits are the only bits set.
For a LVD reset, the LVD bit in the RSR is set, and the SOFT, WDR, EXT, LOC, and LOL bits are cleared
to 0 even if another type of reset condition is detected during the reset sequence for LVD.
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
29-10
Freescale Semiconductor