CS1W-CN313 Omron, CS1W-CN313 Datasheet - Page 20

• Manufacturer Part Number: CS1W-CN313
• Description: "CABLE CS1 EXP I/O,30cm"
• Manufacturer: Omron

Specifications of CS1W-CN313

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7
7-1
7-2
Change to Settings of Pin 7 on DIP Switch
Front Panel DIP Switch
Effect of Pin 5 and Pin 7 on Peripheral Port
xx
Upgrades Made to New Version of CQM1H CPU Units
Upgrades Made to New Version of CQM1H CPU Units
Reading Manufacturing Numbers
Changes in Specifications
Note The setting of pin 7 is ignored. Leave it at the factory setting.
When switching a load with a high inrush current such as an incandescent
lamp, suppress the inrush current as shown below.
The following changes in specifications apply to all CQM1H CPU Units manu-
factured on or after 1 June 2000 (manufacturing number 0160). Check the
manufacturing number of your CPU Units to see if these specifications apply.
It is no longer necessary to set the device being connected to the peripheral
port using the setting of pin 7 on the front panel DIP switch. The setting of pin
7 is ignored and the device connected to the peripheral port (e.g., a Program-
ming Console or personal computer running Programming Device software)
will be automatically detected.
0
Pin 7
Pin 5
OFF
ON
▲
Front panel DIP
1
switch
6
OFF
ON
Pin 7
OFF/ON
OFF/ON
▲
0
Providing a dark current of approx.
one-third of the rated value through
an incandescent lamp
Countermeasure 1
OUT
COM
Rightmost digit of year (2000 = 0)
Month (1 to 9 = Jan to Sept, x to z = Oct to Dec)
Day of month (01 to 31)
The setting of pin 7 has no special function.
Leave it at the factory setting.
Programming Console con-
nected
Programming Console
Programming Console
R
Peripheral port operation
Countermeasure 2
OUT
COM
Providing a limiting resistor
Device other than Programming
Console connected
Operation according to PLC
Setup in DM 6650 to DM 6654
Operation according to standard
settings
R
Factory setting: ON
7