PIC16F1947-I/PT Microchip Technology Inc., PIC16F1947-I/PT Datasheet - Page 118

• Manufacturer Part Number: PIC16F1947-I/PT
• Description: 64 TQFP 10x10x1mm TRAY28KB Flash, 1KB RAM, 256B EEPROM, LCD, 1.8-5.5V
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F1947-I/PT

• A/d Inputs: 17-Channel, 10-Bit
• Comparators: 3
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 54
• Interface: CAN/I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 64-pin TQFP
• Programmable Memory: 28K Bytes
• Ram Size: 1K Bytes
• Speed: 32 MHz
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC16F/LF1946/47
EXAMPLE 11-4:
DS41414B-page 118
; This row erase routine assumes the following:
; 1. A valid address within the erase block is loaded in ADDRH:ADDRL
; 2. ADDRH and ADDRL are located in shared data memory 0x70 - 0x7F
BCF
BANKSEL
MOVF
MOVWF
MOVF
MOVWF
BSF
BCF
BSF
BSF
MOVLW
MOVWF
MOVLW
MOVWF
BSF
NOP
NOP
BCF
BSF
ERASING ONE ROW OF PROGRAM MEMORY
INTCON,GIE
EEADRL
ADDRL,W
EEADRL
ADDRH,W
EEADRH
EECON1,EEPGD
EECON1,CFGS
EECON1,FREE
EECON1,WREN
55h
EECON2
0AAh
EECON2
EECON1,WR
EECON1,WREN
INTCON,GIE
; Disable ints so required sequences will execute properly
; Load lower 8 bits of erase address boundary
; Load upper 6 bits of erase address boundary
; Point to program memory
; Not configuration space
; Specify an erase operation
; Enable writes
; Start of required sequence to initiate erase
; Write 55h
;
; Write AAh
; Set WR bit to begin erase
; Any instructions here are ignored as processor
; halts to begin erase sequence
; Processor will stop here and wait for erase complete.
; after erase processor continues with 3rd instruction
; Disable writes
; Enable interrupts
Preliminary
 2010 Microchip Technology Inc.