HD64570F16 Renesas Electronics America, HD64570F16 Datasheet - Page 292

• Manufacturer Part Number: HD64570F16
• Description: IC SCA SRL COMM ADAPTER 88QFP
• Manufacturer: Renesas Electronics America

Specifications of HD64570F16

• Applications: ISDN
• Interface: Serial
• Voltage - Supply: 4.75 V ~ 5.25 V
• Package / Case: 88-QFP
• Mounting Type: Surface Mount
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Table 6.4
Register
Name
Number of
bits
Function
Role in
DMAC
operation
Register
update
Register
updated by
the MPU
Table 6.5 shows a memory-to-MSCI chained-block single-frame transfer using four descriptors
and four buffers. In this example, data is not added to the buffers during transmission. As
described in the table, DMA operation of frame 1 ends after steps 1 to 5, when the DMAC enters
DMA initial state. The transfer control register value is retained and thus DMA transfer of frame
2 subsequently starts when the DE bit is set to 1. When frame 2 is completed, the CDA and EDA
contents are equal. Accordingly, the DMAC transfers no data, even if an additional request is
issued from the MSCI, and generates an interrupt DMIA (if enabled).
Rev. 0, 07/98, page 276 of 453
Receive Buffer Length
(BFL)
16
—
—
—
—
Control Registers Used in Memory-to-MSCI Chained-Block Transfer Mode
(transmission) (cont)
Byte Count Register
(BCR)
16
Specifies the byte count of
the data to be transferred to
the MSCI.
Writing to this register by
the MPU is inhibited.
When the contents of this
register equal 0000H,
reading from the current
buffer is completed.
The contents of this
register are decremented
each time one byte or one
word is read. When the
buffer is switched, the byte
length specified by the
descriptor is loaded.
—
Buffer Address Register
(BAR)
24
Specifies the system
memory address of the
data being transferred to
the MSCI.
Writing to this register by
the MPU is inhibited.
When a transfer request
is issued, data is read
from the address
specified by this register.
The contents of this
register are incremented
each time one byte or one
word is read. When the
buffer is switched, the
next buffer start address
is loaded.
—