PSB 21393 H V1.3 Infineon Technologies, PSB 21393 H V1.3 Datasheet - Page 46

• Manufacturer Part Number: PSB 21393 H V1.3
• Description: IC CODEC W/TRANSCEIVER MQFP-44
• Manufacturer: Infineon Technologies
• Series: SCOUT™r

Specifications of PSB 21393 H V1.3

• Function: CODEC
• Interface: IOM-2, SCI, UPN
• Number Of Circuits: 1
• Voltage - Supply: 3.3V, 5V
• Current - Supply: 27mA
• Mounting Type: Surface Mount
• Package / Case: 44-BQFP
• Includes: Activation and Deactivation, Channel Handler, DTMF / Tone / Ringing Generator, HDLC Controller, Speakerphone, UPN Transceiver
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Operating Temperature: -
• Other names: PSB21393HV1.3XT; PSB21393HV13XP; SP000007533; SP000007534

Data Sheet
2.2.2.1.2 Monitoring Data
Figure 18 gives an example for monitoring of two IOM-2 time slots each on DU or DD
simultaneously. For monitoring on DU and/or DD the channel registers with even
numbers (CDA10, CDA20) are assigned to time slots with even numbers TS(2n) and the
channel registers with odd numbers (CDA11, CDA21) are assigned to time slots with odd
numbers TS(2m+1) (n,m = 0...5). The user has to take care of this restriction by
programming the appropriate time slots.
Figure 18
Example for Monitoring Data
2.2.2.1.3 Monitoring TIC Bus
Monitoring the TIC bus (TS11) is handled as a special case. The TIC bus can be
monitored with the registers CDAx0 by setting the EN_TBM (Enable TIC Bus Monitoring)
bit in the control registers CRx. The TSDPx0 must be set to 08
or 88
.
a) Monitoring Data
h
for monitoring from DD respectively.
CDA_CR1.
CDA_CR2.
EN_O:
EN_O:
EN_I:
EN_I:
DPS:
DPS:
TSS:
TSS:
CDA20
CDA10
TS(2n)
TS(2n)
’0’
’1’
’0’
’1’
’1’
’0’
36
TS(2m+1)
TS(2m+1)
CDA11
CDA21
’0’
’0’
’1’
’1’
’1’
’0’
h
for monitoring from DU
DD
DU
n,m = 0...5
PSB 21391
PSB 21393
Interfaces
2001-03-07