MT90221 Zarlink Semiconductor, MT90221 Datasheet - Page 86

• Manufacturer Part Number: MT90221
• Description: Quad Inverse Multiplexing For Atm (IMA) Device With Flexible Ima And Uni Mode
• Manufacturer: Zarlink Semiconductor

8.0 Application Notes
Inverse Multiplexing for ATM (IMA) divides a high-
bandwidth stream of ATM cells in a round-robin
fashion and sends them over grouped T1/E1 lines in
a logical connection (on public or private networks)
and recombines the cells to recover the original high-
bandwidth stream at the receiving end. Zarlink's
MT90221 is ideally suited to implement the IMA
function.
8.1
Many
generation of a 1.544 MHz (T1) or 2.048 MHz (E1)
transmit clock reference signal at an input pin. The
MT9042 can generate both these clocks and the ST-
BUS back-plane signals (C4,F0). Figure 19 provides
an example of PCM Modes 2 and 4 in an IMA
implementation using existing T1/E1 framers and a
common 2 Mbps ST-Bus backplane.
New generation Zarlink framers only require the ST-
BUS 4.096 MHz (C4) clock and a Frame Pulse (F0i)
at the transmit interface. An internal PLL generates
the required 1.544 MHz (T1) or 2.048 MHz (E1)
transmit clock. Figure 20 provides an example of
PCM Modes 2 and 4 in an IMA implementation
based on the Zarlink MT90221 and the Zarlink
MT9074 framers. This configuration supports CTC
mode. Although the MT9074 use the ST-Bus format
but it is not configured as a common backplane.
Figure 21 exemplifies PCM Modes 2 and 4 in an IMA
implementation supporting the asynchronous link
operation mode. Each T1 or E1 framer uses
independent clock and synchronization signals which
corresponds to ITC mode.
Figure 22 exemplifies PCM Modes 1 and 3 in an IMA
implementation supporting the asynchronous link
operation mode. Each T1 or E1 framer uses
independent clock and synchronization signals.
Connecting the MT90221 to Various T1/E1
Framers
off-the-shelf
T1/E1
framers
require
the
MT90221
77