upd78f0148m1gka1-9eu Renesas Electronics Corporation., upd78f0148m1gka1-9eu Datasheet - Page 609

• Manufacturer Part Number: upd78f0148m1gka1-9eu
• Description: 8-bit Single-chip Microcontrollers
• Manufacturer: Renesas Electronics Corporation.

sales representative.
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
Infrared reflow
VPS
Wave soldering
Partial heating
Soldering Method
These products should be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, please contact an NEC Electronics
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
(1)
µ
µ
µ
µ
µ
µ
µ
µ
PD780143GC-×××-8BT, 780144GC-×××-8BT, 780146GC-×××-8BT, 780148GC-×××-8BT,
PD780143GC(A)-×××-8BT, 780144GC(A)-×××-8BT, 780146GC(A)-×××-8BT, 780148GC(A)-×××-8BT,
PD780143GC(A1)-×××-8BT, 780144GC(A1)-×××-8BT, 780146GC(A1)-×××-8BT, 780148GC(A1)-×××-8BT,
PD780143GC(A2)-×××-8BT, 780144GC(A2)-×××-8BT, 780146GC(A2)-×××-8BT, 780148GC(A2)-×××-8BT,
PD78F0148M1GC-8BT, 78F0148M2GC-8BT, 78F0148M3GC-8BT, 78F0148M4GC-8BT, 78F0148M5GC-8BT,
PD78F0148M6GC-8BT, 78F0148M1GC(A)-8BT, 78F0148M2GC(A)-8BT, 78F0148M3GC(A)-8BT,
PD78F0148M4GC(A)-8BT, 78F0148M5GC(A)-8BT, 78F0148M6GC(A)-8BT, 78F0148M1GC(A1)-8BT,
PD78F0148M2GC(A1)-8BT, 78F0148M5GC(A1)-8BT, 78F0148M6GC(A1)-8BT
Package peak temperature: 235°C, Time: 30 seconds max. (at 210°C or higher),
Count: 2 times or less, Exposure limit: 7 days
10 hours)
Solder bath temperature: 260°C max., Time: 10 seconds max., Count: Once,
Preheating temperature: 120°C max. (package surface temperature), Exposure
limit: 7 days
Pin temperature: 350°C max., Time: 3 seconds max. (per pin row)
Package peak temperature: 215°C, Time: 40 seconds max. (at 200°C or higher),
Count: 2 times or less, Exposure limit: 7 days
10 hours)
CHAPTER 35 RECOMMENDED SOLDERING CONDITIONS
Table 35-1. Surface Mounting Type Soldering Conditions (1/3)
Note
(after that, prebake at 125°C for 10 hours)
User’s Manual U15947EJ3V1UD
Soldering Conditions
Note
Note
(after that, prebake at 125°C for
(after that, prebake at 125°C for
IR35-107-2
VP15-107-2
WS60-107-1
Condition Symbol
Recommended
−
609