sed1374 ETC-unknow, sed1374 Datasheet - Page 231

• Manufacturer Part Number: sed1374
• Description: Sed1374 Embedded Memory Color Lcd Controller
• Manufacturer: ETC-unknow

Epson Research and Development
Vancouver Design Center
1.3 Example Installation
Installation for CEPC Environment
Windows® CE Display Drivers
Issue Date: 98/11/11
Windows CE v2.0 can be loaded on a PC using a floppy drive or a hard drive. The two
methods are described below:
To load CEPC from a floppy drive:
To load CEPC from a hard drive:
6. Edit the file DISPDRVR.C (located in X:\wince\platform\odo\drivers\display\
7. Generate the proper building environment by double-clicking on the sample project
8. Type BLDDEMO <ENTER> at the DOS prompt of the X86 DEMO7 window to gen-
1. Create a DOS bootable floppy disk.
2. Edit CONFIG.SYS on the floppy disk to contain the following line only.
3. Edit AUTOEXEC.BAT on the floppy disk to contain the following lines.
4. Copy LOADCEPC.EXE from c:\wince\public\common\oak\bin to the bootable
5. Confirm that NK.BIN is located in c:\wince\release.
6. Reboot the system from the bootable floppy disk.
1. Copy LOADCEPC.EXE to the root directory of the hard drive.
2. Edit CONFIG.SYS on the hard drive to contain the following line only.
3. Edit AUTOEXEC.BAT on the hard drive to contain the following lines.
4. Confirm that NK.BIN is located in c:\wince\release.
5. Reboot the system from the hard drive.
4BPP1374) to set the desired screen resolution, color depth (bpp) and panel type. The
sample code defaults to a 320x240 color single passive 4-bit LCD panel. To support
one of the other listed panels, change the #define statement.
icon (i.e. X86 DEMO7).
erate a Windows CE image file (NK.BIN).
floppy disk.
device=a:\himem.sys
mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 c:\wince\release\nk.bin
device=c:\himem.sys
mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 c:\wince\release\nk.bin
X26A-E-001-01
SED1374
Page 5