MCIMX6D7CVT08AC Freescale Semiconductor, MCIMX6D7CVT08AC Datasheet - Page 15

• Manufacturer Part Number: MCIMX6D7CVT08AC
• Description: Processors - Application Specialized i.MX6D
• Manufacturer: Freescale Semiconductor
• Type: Multimedia Applicationsr

Specifications of MCIMX6D7CVT08AC

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 800 MHz
• Data Ram Size: 16 KB
• Maximum Operating Temperature: + 105
• Mounting Style: SMD/SMT
• Package / Case: FCBGA
• Interface Type: I2C, I2S, UART, USB
• Memory Type: L1/L2 Cache, ROM, SRAM
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2

Freescale Semiconductor
TEMPMON
Mnemonic
USBOH3A
UART-1
UART-2
UART-3
UART-4
UART-5
TZASC
Block
Temperature Monitor System
Trust-Zone Address
Space Controller
UART Interface
USB 2.0 High Speed
OTG and 3x HS
Hosts
Block Name
i.MX 6Dual/6Quad Applications Processors for Industrial Products, Rev. 2
Table 2. i.MX 6Dual/6Quad Modules List (continued)
Control
Peripherals
Security
Connectivity
Peripherals
Connectivity
Peripherals
Subsystem
The temperature monitor/sensor IP module for detecting high
temperature conditions. The temperature read out does not reflect case
or ambient temperature. It reflects the temperature in proximity of the
sensor location on the die. Temperature distribution may not be uniformly
distributed; therefore, the read out value may not be the reflection of the
temperature value for the entire die.
The TZASC (TZC-380 by ARM) provides security address region control
functions required for intended application. It is used on the path to the
DRAM controller.
Each of the UARTv2 modules support the following serial data
transmit/receive protocols and configurations:
USBOH3 contains:
• 7- or 8-bit data words, 1 or 2 stop bits, programmable parity (even, odd
• Programmable baud rates up to 4 MHz. This is a higher max baud rate
• 32-byte FIFO on Tx and 32 half-word FIFO on Rx supporting
• IrDA 1.0 support (up to SIR speed of 115200 bps)
• Option to operate as 8-pins full UART, DCE, or DTE
• One high-speed OTG module with integrated HS USB PHY
• One high-speed Host module with integrated HS USB PHY
• Two identical high-speed Host modules connected to HSIC USB ports.
or none)
relative to the 1.875 MHz, which is stated by the TIA/EIA-232-F
standard and the i.MX31 UART modules.
auto-baud
Brief Description
Modules List
15