LPC3130FET180,551 NXP Semiconductors, LPC3130FET180,551 Datasheet - Page 19

IC ARM9 MCU 180MHZ 180-TFBGA

LPC3130FET180,551

Manufacturer Part Number
LPC3130FET180,551
Description
IC ARM9 MCU 180MHZ 180-TFBGA
Manufacturer
NXP Semiconductors
Series
LPC3000r
Datasheet

Specifications of LPC3130FET180,551

Package / Case
180-TFBGA
Core Processor
ARM9
Core Size
32-Bit
Speed
180MHz
Connectivity
EBI/EMI, I²C, MMC, SPI, UART/USART, USB OTG
Peripherals
DMA, I²S, LCD, PWM, WDT
Program Memory Type
ROMless
Ram Size
96K x 8
Voltage - Supply (vcc/vdd)
1.1 V ~ 3.6 V
Data Converters
A/D 4x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Processor Series
LPC31
Core
ARM926EJ-S
Data Bus Width
16 bit, 32 bit
Data Ram Size
96 KB
Interface Type
I2C/I2S/UART/USB
Maximum Clock Frequency
180 MHz
Number Of Timers
4
Operating Supply Voltage
2.7 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
MDK-ARM, RL-ARM, ULINK2
Minimum Operating Temperature
- 40 C
On-chip Adc
4-ch x 10-bit
Cpu Family
LPC3000
Device Core
ARM926EJ-S
Device Core Size
16/32Bit
Frequency (max)
180MHz
Program Memory Size
Not Required
Total Internal Ram Size
96KB
Number Of Timers - General Purpose
4
Operating Supply Voltage (typ)
1.2/1.8/2.8/3.3/5V
Operating Supply Voltage (max)
1.3/3.6V
Operating Supply Voltage (min)
1/1.1/1.65/2.7V
Instruction Set Architecture
RISC
Operating Temp Range
-40C to 85C
Operating Temperature Classification
Industrial
Mounting
Surface Mount
Pin Count
180
Package Type
TFBGA
Package
180TFBGA
Family Name
LPC3000
Maximum Speed
180 MHz
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
568-4850 - KIT EVAL FOR LPC313X568-4062 - DEBUGGER J-LINK JTAG568-4061 - DEBUGGER U-LINK2 JTAG FOR NXP
Number Of I /o
-
Eeprom Size
-
Program Memory Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
568-4696
935288013551
LPC3130FET180-S

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC3130FET180,551
Quantity:
9 999
Part Number:
LPC3130FET180,551
Manufacturer:
NXP Semiconductors
Quantity:
10 000
NXP Semiconductors
LPC3130_3131
Preliminary data sheet
6.10 High-speed Universal Serial Bus 2.0 On-The-Go (OTG)
6.11 DMA controller
The USB OTG module allows the LPC3130/3131 to connect directly to a USB host such
as a PC (in device mode) or to a USB device in host mode. In addition, the LPC3130/3131
has a special, built-in mode in which it enumerates as a Device Firmware Upgrade (DFU)
class, which allows for a (factory) download of the device firmware through USB.
This module has the following features:
USB-IF TestID for Hi-speed peripheral silicon: 40700062
USB-IF TestID for Hi-speed embedded host silicon: 120000182
The DMA Controller can perform DMA transfers on the AHB bus without using the CPU.
This module has the following features:
Supports 1/4-bit SD cards.
Card detection and write protection.
FIFO buffers of 16 bytes deep.
Host pull-up control.
SDIO suspend and resume.
1 to 65 535 bytes blocks.
Suspend and resume operations.
SDIO Read-wait.
Maximum clock speed of 52 MHz (MMC 4.1).
Supports CE-ATA 1.1.
Supports 1-bit, 4-bit, and 8-bit MMC cards and CE-ATA devices.
Complies with Universal Serial Bus specification 2.0.
Complies with USB On-The-Go supplement.
Complies with Enhanced Host Controller Interface Specification.
Supports auto USB 2.0 mode discovery.
Supports all high-speed USB-compliant peripherals.
Supports all full-speed USB-compliant peripherals.
Supports software Host Negotiation Protocol (HNP) and Session Request Protocol
(SRP) for OTG peripherals.
Contains UTMI+ compliant transceiver (PHY).
Supports interrupts.
This module has its own, integrated DMA engine.
Supported transfer types:
Memory to memory:
All information provided in this document is subject to legal disclaimers.
Rev. 1.04 — 27 May 2010
Low-cost, low-power ARM926EJ-S microcontrollers
LPC3130/3131
© NXP B.V. 2010. All rights reserved.
19 of 72

Related parts for LPC3130FET180,551