LPC3130FET180,551 NXP Semiconductors, LPC3130FET180,551 Datasheet - Page 20

• Manufacturer Part Number: LPC3130FET180,551
• Description: IC ARM9 MCU 180MHZ 180-TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3130FET180,551

• Package / Case: 180-TFBGA
• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, PWM, WDT
• Program Memory Type: ROMless
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJ-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 96 KB
• Interface Type: I2C/I2S/UART/USB
• Maximum Clock Frequency: 180 MHz
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 10-bit
• Cpu Family: LPC3000
• Device Core: ARM926EJ-S
• Device Core Size: 16/32Bit
• Frequency (max): 180MHz
• Program Memory Size: Not Required
• Total Internal Ram Size: 96KB
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.2/1.8/2.8/3.3/5V
• Operating Supply Voltage (max): 1.3/3.6V
• Operating Supply Voltage (min): 1/1.1/1.65/2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 180
• Package Type: TFBGA
• Package: 180TFBGA
• Family Name: LPC3000
• Maximum Speed: 180 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-4850 - KIT EVAL FOR LPC313X568-4062 - DEBUGGER J-LINK JTAG568-4061 - DEBUGGER U-LINK2 JTAG FOR NXP
• Number Of I /o: -
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4696; 935288013551; LPC3130FET180-S

NXP Semiconductors
LPC3130_3131
Preliminary data sheet
6.12 Interrupt controller (INTC)
Table 9:
The interrupt controller collects interrupt requests from multiple devices, masks interrupt
requests, and forwards the combined requests to the processor. The interrupt controller
also provides facilities to identify the interrupt requesting devices to be served.
This module has the following features:
Peripheral name
NAND flash controller
SPI
MCI
LCD interface
UART
I2C0/1-bus master/slave
I2S0/1 receive
I2S0/1 transmit
PCM interface
•
•
•
•
•
•
•
•
•
•
– Memory can be copied from the source address to the destination address with a
Memory to peripheral:
– Data is transferred from incrementing memory to a fixed address of a peripheral.
Peripheral to memory:
– Data is transferred from a fixed address of a peripheral to incrementing memory.
Supports single data transfers for all transfer types.
Supports burst transfers for memory to memory transfers. A burst always consists of
multiples of 4 (32 bit) words.
The DMA controller has 12 channels.
Scatter-gather is used to gather data located at different areas of memory. Two
channels are needed per scatter-gather action.
Supports byte, half word and word transfers, and correctly aligns it over the AHB bus.
Compatible with ARM flow control for single requests (sreq), last single requests
(lsreq), terminal count info (tc), and dma clearing (clr).
Supports swapping in endianess of the transported data.
The interrupt controller decodes all the interrupt requests issued by the on-chip
peripherals.
Two interrupt lines (Fast Interrupt Request (FIQ), Interrupt Request (IRQ)) to the ARM
core. The ARM core supports two distinct levels of priority on all interrupt sources,
FIQ for high priority interrupts and IRQ for normal priority interrupts.
Software interrupt request capability associated with each request input.
specified length, while incrementing the address for both the source and
destination.
The flow is controlled by the peripheral.
The flow is controlled by the peripheral.
Peripherals that support DMA access
All information provided in this document is subject to legal disclaimers.
Rev. 1.04 — 27 May 2010
Low-cost, low-power ARM926EJ-S microcontrollers
Supported Transfer Types
Memory to memory
Memory to peripheral and peripheral to memory
Memory to peripheral and peripheral to memory
Memory to peripheral
Memory to peripheral and peripheral to memory
Memory to peripheral and peripheral to memory
Peripheral to memory
Memory to peripheral
Memory to peripheral and peripheral to memory
LPC3130/3131
© NXP B.V. 2010. All rights reserved.
20 of 72