EP9302-CQZ Cirrus Logic Inc, EP9302-CQZ Datasheet - Page 436

• Manufacturer Part Number: EP9302-CQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-CQZ

• Program Memory Type: ROMless
• Package / Case: 208-LQFP
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Data Ram Size: 16 bit
• Interface Type: USB, USART, SPI
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 37
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 4
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1137

10
SAR_BASEx
10-42
DMA Controller
EP93xx User’s Guide
31
15
Address:
Definition:
Bit Descriptions:
30
14
29
13
28
12
SAR_BASE0: Channel Base Address + 0x0018 - Read/Write
SAR_BASE1: Channel Base Address + 0x001C - Read/Write
This register contains the base memory address from which the DMA
controller requests data.
SAR_BASEx:
27
11
26
10
Copyright 2007 Cirrus Logic
25
9
For a double/multiple buffer transfer, the second buffer
descriptor can be programmed while the transfer using the
first buffer is being carried out (thus reducing software
latency impact). The NFB interrupt is generated when
transfer begins using the second buffer. The NFB interrupt
service routine can then be used to update the free buffer
descriptor (in the case where a third buffer is required).
If BCRx = 0 when the transfer is triggered, then NO
transfers will occur, that is, the DMA will stay in the STALL
state.
x = “0” or “1” representing the double buffer per channel.
This register contains the base memory address from
which the DMA controller requests data. At least 1 of the
SAR_BASEx registers must be programmed before the
ENABLE bit and the START bit (in the case of software-
trigger M2M mode) are set in the Control register, and also
before the corresponding BCRx register is programmed.
The second buffer descriptor can be programmed while
the transfer using the “other” buffer is being carried out
(thus reducing software latency impact). When transferring
from external device to memory, the SAR_BASEx will
contain the base address of the memory mapped device.
SAR_BASEx
SAR_BASEx
24
8
23
7
22
6
21
5
20
4
19
3
18
2
17
1
DS785UM1
16
0