PIC24F16KA102-I/SS Microchip Technology, PIC24F16KA102-I/SS Datasheet - Page 38

• Manufacturer Part Number: PIC24F16KA102-I/SS
• Description: IC PIC MCU FLASH 16K 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA102-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 28-SSOP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 512 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24F
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1.5 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA240017 - MODULE PLUG-IN PIC24F16KA102 PIM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FXXKAXXX
5.2.13
The QVER command queries the version of the
programming executive software stored in the test
memory. The “version.revision” information is returned
in the response‘s QE_Code using a single byte in the
following format:
Main version in upper nibble and revision in the lower
nibble (i.e., 23h stands for version 2.3 of the
programming executive software).
Expected Response (2 words):
5.3
The programming executive sends a response to the
programmer for each command that it receives. The
response indicates if the command was processed
correctly. It includes any required response data or
error data.
The programming executive response set is provided in
Table 5-2. This table contains the opcode, mnemonic
and description for each response. The response format
is described in Section 5.3.1 “Response Format”.
TABLE 5-2:
DS39919A-page 38
15
Opcode
Length
1h
2h
3h
Opcode
Opcode
1BMNh (“MN” stands for version M.N)
0002h
Field
Programming Executive
Responses
12 11
QVER COMMAND
PASS
FAIL
NACK
Mnemonic
Bh
1h
PROGRAMMING EXECUTIVE
RESPONSE OPCODES
Command successfully
processed.
Command unsuccessfully
processed.
Command not known.
Description
Length
Description
Advance Information
0
5.3.1
All programming executive responses have a general
format consisting of a two-word header and any
required data for the command.
5.3.1.1
The opcode is a 4-bit field in the first word of the
response. The opcode indicates how the command
was processed (see Table 5-2). If the command was
processed successfully, the response opcode is PASS;
if there was an error in processing the command, the
response opcode is FAIL and the QE_Code indicates
the reason for the failure. If the command sent to
the programming executive is not identified, the
programming executive returns a NACK response.
5.3.1.2
The Last_Cmd is a 4-bit field in the first word of
the response and it indicates the command that the
programming executive processed. As the program-
ming executive can process only one command at a
time, this field is technically not required. However, it
can be used to verify if the programming executive
correctly received the command that the programmer
transmitted.
Opcode
Last_Cmd
QE_Code
Length
D_1
D_N
15
Opcode
Field
RESPONSE FORMAT
12 11
Opcode Field
Last_Cmd Field
Response opcode.
Programmer command that
generated the response.
Query code or error code.
Response length in 16-bit words
(includes 2 header words).
First 16-bit data word (if applicable).
Last 16-bit data word (if applicable).
Last_Cmd
D_N (if applicable)
D_1 (if applicable)
Length
© 2008 Microchip Technology Inc.
...
8 7
Description
QE_Code
0