ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 103

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

{
switch (I2C_IsTransmitCompleted())
{
I2C_Generate_Start ();
while(!((I2C_IsTransmitCompleted())== I2C_START_OK));
I2C_Load_Address (Addr_Byte_Tx, I2C_TX_MODE);
Timeoutcount = 0 ;
Temp1 = I2C_IsTransmitCompleted() ;
while ((User_Timeout_Function()) && ( Temp1 != I2C_ADD_TX_OK))
{
}
switch (Temp1)
{
}
I2C_PutByte (My_Data) ;
/* Here, user can perform other tasks or operations except
transmission till the time transmission is complete, after which
user can perform transmission again */
case I2C_TX_AF:
case I2C_TX_ARLO:
case I2C_TX_BERR:
case I2C_DATA_TX_OK:
default:
}
I2C_PutBuffer (Buff,(unsigned char)10);
Timeoutcount = 0 ;
Temp1 = I2C_IsTransmitCompleted() ;
while ( (User_Timeout_Function())&& ((Temp1) == I2C_TX_BUFFER_ONGOING))
{
}
if (User_Timeout_Function())
{
Temp1 = I2C_IsTransmitCompleted() ;
case I2C_TX_AF:
default:
User_Function();
break;
break;
User_Function();
break;
transmission till the time transmission is complete, after which
user can perform transmission again */
Temp1 = I2C_IsTransmitCompleted() ;
switch(Temp1)
{
User_Function();
break;
break;
case I2C_TX_AF:
case I2C_TX_BERR:
/* Here, user can perform other tasks or operations except
/* Transmission of set of data from the user buffer */
/* Ensure that there are no pending requests */
/* User pointer is copied to global pointer */
/* User data is copied to global variable */
/* To be sure that the communication by this
/* If none of the above condition is true */
/* To check transmission status */
/* To check transmission status */
point has been completed */
Function Descriptions
/* Error Management */
103/235